Next point - tank levelling

[MitchM]

Meh...you're good to go as far as support for the weight of the tank.

As far as making it pretty and down the road not saying "I should have done "****" differently - that's your call.

Mitch

[Lance]

Wide, hardwood shims every 5 to 6 inches and you're good to go.

[Aquattro]

Originally Posted by Lance

Wide, hardwood shims every 5 to 6 inches and you're good to go.

Except once in place, I won't be able to get to the back edge...but I think I should be ok, the reaer centre is sitting solidly, so shimming the corners should suffice. I hope

[golf nut]

Originally Posted by Aquattro

Except once in place, I won't be able to get to the back edge...but I think I should be ok, the reaer centre is sitting solidly, so shimming the corners should suffice. I hope

The 4 corners are more important to be solid than the center, I really believe that doing the corners rigidly is better than shims that may give and leave the center as the main support.

[StirCrazy]

Originally Posted by Aquattro

, I won't be able to get to the back edge...

thats what you said last time..

Steve

[Aquattro]

Originally Posted by StirCrazy

thats what you said last time..

Steve

This time I built a false back, so it's right against the wall. Once in place, there's no getting behind it.