|
|
|
#411
10-18-2010, 08:17 PM
|
|||||
|
|||||
Quote:
 Does the clear stuff also burn your nose hairs and make you feel a bit light headed?
|
|
#412
10-18-2010, 08:24 PM
|
|||||
|
|||||
|
Oh yeahhhhhhhh.
Lance, my understanding is that the clear stuff is the required bonder because it has some flex/give to it, but the grey stuff will still bond it. I like to use the clear stuff even on rigid plumbing because of the clean look you get out of it (the purple primer makes such a mess of things). I dunno it's what I've always done, one of those things that "someone told it was fine" and I've believed it ever since.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
|
|
#413
10-18-2010, 09:50 PM
|
|||||
|
|||||
|
Spilling the clear stuff wouldnt destroy m living room floor though where's the fun in that?!
Looking great man. Glad to hear the waves are working for you. You have the extension in there too?
|
|
#414
10-18-2010, 11:24 PM
|
|||||
|
|||||
|
ya Tony we will just take your word that the WAVES ARE FREAKING AWESOME, WAY TO GO TONY. NOW IM YELLING CAUSE I CAN'T EVEN IMAGINE THE DAM TANK WITH WAVES .ARUGHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
&^**^&%&^**^$&$&*$^*$^&(^$&$^&* THAT IS ME YELLING AT YOU TONY. NOW may we pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeee see some more pictures.......... 
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think.
|
|
#415
10-19-2010, 02:00 AM
|
||||
|
||||
|
When I end up having to upgrade my tank to fit the growing school of tangs, I will probably be looking at a tank of the same dimensions. 72" x 30" x 30". I'd have to remove the door frame but if I have to do that, then it'll be worth it. What a huge thread Tony.
Anthony
__________________
If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it!
|
|
#416
10-19-2010, 03:39 AM
|
||||
|
||||
|
I am glad that your wave box will work for you. When are you putting rock in that bad boy?
|
|
#417
10-19-2010, 04:54 AM
|
|||||
|
|||||
|
Hey Tony, can I come by to see the new setup. Please Please, pretty please?
__________________
 Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk
|
|
#419
10-21-2010, 05:11 AM
|
|||||
|
|||||
|
Quote:
|
|
#420
10-21-2010, 07:59 AM
|
|||||
|
|||||
|
Quote:
Tinkered around with flow settings tonight, here's a bit of a preview. http://www.youtube.com/watch?v=LUJXrlsf9U4 The sump return comes out 4 nozzles placed along the Calfo manifold. 3 on the right pointing left, 1 on the left pointing down. The idea I had here was to create a vertical gyre that sweeps towards the overflow. The two 6080's in the middle on Wavysea's sweeping left and right, at different speeds so that sometimes they're in sync and sometimes they're not. Two waveboxes on the left. Last but not least (and unfortunately not shown) there are 2 6100's positioned one left and pointing right and back, and the other one right and pointing left and forward - these are on the controller so alternating between 100% and 10% about once a minute. The back room is a terrible clusterfrack of wires and I have my work cut out for me the next day or two getting that all cleaned up. Next up I need to get the heater on there and the Ranco and then I'm dumping salt and working on rocks!
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
|
Linear Mode
