![]() |
|
#1
|
|||||
|
|||||
![]() Have one of the new pails (not the hammer type), pulled the tab and about 1/2 the circumference came off and appeared to break clean but couldn't open. Ends up the all of it all needs to come off but needed side cutters to restart.
__________________
my tank |
#2
|
||||
|
||||
![]() Years ago when I worked at a restaurant we got a lot of bulk food in 5g pails with no tabs or screw off lids. We just took a metal spatula or large knife and whacked the top corner of the lid in 6-7 places (must actually cut through the lid) and then peeled the lid right off.
|
#3
|
|||||
|
|||||
![]() it just may be a faulty lid. i would cut it off after 10 min of cursing and prolly have a blood sacrifice in between.
on a side note how many reefers does it take to open a pail of salt??? sorry froce of habit for newfie jokes.
__________________
Desperately seeking serenity ... 180g custom build http://www.canreef.com/vbulletin/showthread.php?t=81400 50g custom daycare tank... http://www.canreef.com/vbulletin/showthread.php?t=65428 |
#4
|
|||||
|
|||||
![]() so did you get it open ? if not bring it to the calgary reef meet on thursday.
|
#5
|
||||
|
||||
![]() I got it open, made my own tab like one of the users suggested. I think it was just a faulty lid. I miss the old screw on ones though...
|
#6
|
|||||
|
|||||
![]() Me too. I use IO for half my tanks, and these new lids suck. I broke a nail opening my last bucket!!! I`m changing to the 200 gal boxes instead.
|
#7
|
||||
|
||||
![]() Doubt its default lid , the new IO salts have a new lid as mentioned, like you said the lid has a seam and its here you should find a small tab to pull and it will after removal leave 4 tabs on the lid.
|