![]() |
|
#1
|
|||||
|
|||||
![]() Tiger Torch! Pretty sure it will come off within a minute
![]() Good luck hopefully someone else has come across! |
#2
|
||||
|
||||
![]() I think this one is just missing the tab or something, maybe a defective lid, there seems to be a seem that a tab would open along. I'll figure it out. Might just have to hack job this one.
|
#3
|
|||||
|
|||||
![]() If there is a seam then get the side cutters out and make a tab to pull on...
|
#4
|
|||||
|
|||||
![]() Try hitting the inside ridge on the top of the lid with a hammer, if it's a twist top lid, or hit the bottom of the lid in an upwards motion with a hammer if it's a pull off lid.
__________________
One more fish should be ok?, right!!! ![]() |
#5
|
||||
|
||||
![]() picts would help. But i am sure there must be instruction on the lid of how to open it. Good luck
|
#6
|
|||||
|
|||||
![]() Have one of the new pails (not the hammer type), pulled the tab and about 1/2 the circumference came off and appeared to break clean but couldn't open. Ends up the all of it all needs to come off but needed side cutters to restart.
__________________
my tank |
#7
|
||||
|
||||
![]() Years ago when I worked at a restaurant we got a lot of bulk food in 5g pails with no tabs or screw off lids. We just took a metal spatula or large knife and whacked the top corner of the lid in 6-7 places (must actually cut through the lid) and then peeled the lid right off.
|