Setting up sump...

[Wayne]

Originally Posted by Myka

You only need an emergency drain for a Herbie overflow. The emergency drain would be taller than the main drain. Do a Google search so you know what I'm talking about. It would be a pain in the butt to rig up a Herbie having the drain lines separated like that though.

Are you using an ATO? If not, make sure the return chamber holds plenty of water or you will have to top up way too often. Evaporation will show itself solely in the return chamber, and you can't have the pump running dry!

The return pump area is now going to be 4 Gallons minus the pump and some live rock/rubble and I will be getting an auto top off very soon. Good to know that the return pump area is where I should be putting the switch . I understand the Herbie overflow now. I would only be able to use one of the boxes for drain for normal use and the other would only be used in case of emergency. I agree that isn't the best method for this type of setup. Thanks

[russp]

If you are planning to put a skimmer in the sump you might want to make sure & leave room for it , don't make the mistake that I did & cut yourself short. I left enough room for the skimmer I was using & now I want to upgrade but the space limits my skimmer options big time

[Wayne]

Originally Posted by russp

If you are planning to put a skimmer in the sump you might want to make sure & leave room for it , don't make the mistake that I did & cut yourself short. I left enough room for the skimmer I was using & now I want to upgrade but the space limits my skimmer options big time

I now have 2 different compartments that can be used for skimming. When this skimmer goes for a poop I plan on going to a AquaC Urchin. I know it will fit in either compartment just not sure what water level is recommended (hopefully either 9 or 10") Other wise I would be into building another sump. Thanks

[Wayne]

I just bought some Cheato from the LFS and I am on my way out to pick up some plumbing parts. My local "big orange" named hardware store didn't carry IPEX so now I am on a quest

[Wayne]

Well I siliconed the bulkheads to the tank as I had no other options (besides taking the tank off the stand and making the thickness smaller to get the nuts on). Now I am just finishing gluing the drains and finally I pick up my return pump tomarrow