|
|
|
|
|
#1
10-02-2010, 11:06 PM
|
||||
|
||||
Jason, do you have access to one of those laser levels?
The one I am thinking of shoots a red horizontal line on the wall. If you use one of these you could set it up so that you measure up to the line on all 4 corners and the middle to check for level. A lot more accurate than a bubble level. I have access to one, if need be PM me Dietmar 
|
|
#2
10-03-2010, 06:27 AM
|
||||
|
||||
|
The other option is to silicone on 2 thinner plieces of glass instead of one 1/2" piece. 7mm strips would be cheap. I have a bunch of 1/4" plate glass from windows you can have to cut up for free if you want.
There's a local glass shop near my place that would probably cut what you need for $20 max., probably even $10, out of my 1/4". If you let me know how big a piece you need for both breaks, I can see about getting them to cut my glass for you. Anthony
__________________
If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it!
|
Hybrid Mode
