|
|
|
|
|
#1
09-22-2010, 10:27 PM
|
|||||
|
|||||
I soaked the pellets for 2 days in ro changed the water several times.
I did check to make sure that I had the lines connected correctly too.  Quote:
I tried with and without the filter pads. I've also made sure that all the connections inside are sealed and not leaking. There is a nice laminar discharge, but very little tumbling...
__________________
Ross 9 Gallon Nano, Modular LED Lights 14 Gallon BioCube w/ Rebel LED Lights 67 Gallon Mixed Reef, Modular LED Lights Send in the Clowns - Clown Fish Breeding 5 Gallon Fry Hatchery and 15 Gallon Clown Grow Out Tank 
|
|
#2
09-23-2010, 02:34 AM
|
|||||
|
|||||
|
I had the same problem...I replaced the MJ400 for a MJ1200 and that helped out a lot on the first reactor, but the second one was still kinda bunk. I ended up running each of my TLF's seperate, each with a MJ1200 driving them, and I haven't had any issues since. I think there is too much flow restriction when they are running together...then again, this is just one noobs findings. HTH
__________________
|
|
#3
09-23-2010, 05:08 AM
|
||||
|
||||
|
i also run mine individaully running in series was not working out so great for me
__________________
250G DD LED SPS R.I.P. 180G LED SPS 80"x36". 300G custom build Owner of Mountain Ridge Heating and Gas Class A gas fitter, HVAC
|
Hybrid Mode
