180g peninsula tank build - First ever aquarium

[Milad]

You guys are keen on picking up the clown count. Currently there is 8. Yes I know too many. I was only going to keep 4 but I cat get 4 of the ones that I don't want of the tank so I left everyone in for now. I was expecting more aggression but after the first week it died down. The maroon doesn't let anyone near her anemone and owns about 1sq foot of the end of the tank. The cinnamon herds the occs and percs to the top opposite corner of the tank (doesn't bite but slowly just "herds"). The occs hang around my cleaning magnet all day long and the percs wander the very top of the tank.

I do want to remove 4 but I don't think I will happen until I expand the water volume a bit and move out some liverock from the main display.

I will be doing an update once I got this zeovit stuff on lock. Still trying to figure it out.

[lockrookie]

i have 4 clowns in my 90 they get along just great

[Milad]

Small update on building a Skimmer Silencer
I was having some gurgling noises coming from the intake of my skimmer. I posted on the forums and a few canreef peeps gave me some advice
orginal thread:
http://www.canreef.com/vbulletin/showthread.php?t=68009

Im going with the design elements of:


i took their suggestions and altered to my liking. One think I didn't want to do is over extend the air hose longer than it currently is. So i tried to minimize the extension. I'm assuming the longer the 1/4 line is the harder it is for the skimmer to pull air.

I didnt want to have it hanging inside the tank as the diagram would indicate. I also didnt want water to leak in and I didnt really want to silcone it and I didnt want to prime/seal it. So i made it backwards and a "L"

The basic Idea from what I gather is two tubes, inside a big tube so the sound gets trap inside the big tube but the air keeps getting sucked in

I used Hard 1/4 line that is used in RO/DI unit for the small tubes and 3/4in pvc for the large tube



As you can see from the above picture its a nice L shape so it can hang on the outside of my sump.

Most other diagrams show air being pulled from the top down to the bottom but with my L shape I have it pulling bottom to bottom.
And below you can see how the hard plastic slips tightly into the soft plastic from the skimmer.


I was very shocked how silent it got. I was planning to stuff the silencer with some foam but it didnt need it.

[spoot]

If you put the two pipes on the inside of the chamber past each other, so the end of the bottom one above the end of the top one the silencer should be even more quiet.

[selekt]

Any updates on this build?

[Milad]

Originally Posted by selekt

Any updates on this build?

You can check out my signature. I started a LED build which i have on pause right now but thats only new things happening with the build.

[janey]

How's the wave box working ???

I was thinking of doing the same as you ...