![]() |
|
#1
|
|||||
|
|||||
![]() Good idea with the slurpee cup lid! You could also try a jawfish house. This is what I want to build.
__________________
96" x 16" x 16"//106g Skimmerless Reef, Established Jan. 13, 2012 |
#2
|
|||||
|
|||||
![]() I love this site. Thx everyone for your input. What kind of silicone did you use. And a slurpee lid hey that's a good idea concerns of sharp edges though
__________________
29 gallon oceanic biocube HQI ![]() |
#3
|
||||
|
||||
![]() Quote:
I think the slurpee cup lid could offer the best of both worlds, other than i would be concerned about the sharp edge of the plastic...I know I have cut my finger straw fishing before...lol Probably easy to just silicone the substrate right over the edges though. http://www.nano-reef.com/forums/inde...=172053&st=160 |
#4
|
|||||
|
|||||
![]() When I have made the Slurpee lid houses I have used enough silicone that the edge is covered. I have also simply "buttered" the lid with silicone and rolled it in dry aragonite sand. I always use aquarium silicone. You can find large plastic barnacles in LFSs sometimes too which fit over the hole for a nice natural-ish look, and are usually cheap. If you use a barnacle, glue it on first and then glue the sand and rubble on around it.
I have taken a jigsaw to these barnacles making a bunch of Jawfish "doors": ![]() Last edited by Myka; 08-27-2010 at 08:10 PM. |
#5
|
||||
|
||||
![]() exerpt from post 180 in the aforemetioned thread...
I also noticed that in the first video clip with the Jawfish living in the barnacle covered PVC condo that the fish was moving very gingerly when trying to grab at passing food. To me it looked as if the jawfish could easily receive a cut to it’s body trying to enter that barnacle at the normal lightning speed they usually maneuver in and out of their natural constructed homes. That jawfish seemed very uneasy and on one attempt completely missed the barnacle entrance to his man-made PVC home. Viewing this made me feel sorry for the poor jawfish. just some extra food for thought about this. |