![]() |
#16
|
|||||
|
|||||
![]() Quote:
I had the same problems. The pump on that skimmer is overkill. I put some blocks under it to raise it out of the water about 6 inches. It helps alot. If I was doing a lot of messing around in the tank I had to back the air and open the water flow wide open for a day. Then slowly open the air up and close the water exit valve. Also on a side note once you have it running with the air valve fully open. Remove the air valve as it plugs up with gunk for some reason. Lastly for the mirco bubbles I used a filter sock for a day or so to keep them at bay until the skimmer settled down. In hind sight I would have bought the same size skimmer with the smaller pump. Also despight the builder of that sump telling me I did'nt need baffles I would have installed them. If you need any other help just P.M me. Also some photos of the whole tank would be nice ![]() |