![]() |
#11
|
||||
|
||||
![]() So my Ultrabright CREE Q5 LED's came in the other day....yahhhhh....
![]() So my first task was finding an enclosure for this....spend alot of time looking for this, but found it at Princess Auto: ![]() So I placed some foam in the bottom and place the LED and Heat sink in, just barely fit.... ![]() This one is the bottom view with the diffusor in: ![]() So I attached some Female bullet connectors to the LED wires: ![]() All Done with the connectors, now to place everything inside: ![]() ![]() Now connected all my lead to a 12v power source and viloa, we have light! ![]() Placed some glass that I had kicking around, on top of my existing light: ![]() Now Placing the boxes on top of the glass: ![]() So here is what the tank looks light with only the LED's on: ![]() Not to shabby with just 2 LED's...hehehehe Here are some pics with all the lights turned on: ![]() ![]() |