lastlight's 34g solana - Page 26

Greenmaster · #**251** 08-06-2010, 06:24 AM

The tank is looking really good. It looks way bigger then 34g... I believe the 1/4" mesh would stop the fish from jumping... the really small fish may be able to fit through but it would be hard for there aim to be that good... it's not that easy to jump into small holes

lastlight · #**252** 08-06-2010, 06:43 AM

Thanks. Yeah unbelievably a bangaii I had bought also jumped. I give up on new fish until I have a canopy made.

The canopy will fix my issue with this new light blinding everyone in the room.

My other issue is the intense heat. My fan unit can't cope with it and I took a stab at the bar fridge chiller today before failing...and then reading more online and finding that they don't really work for ANYONE.

So the good news is I have line plumbed into my basement for a chiller but I don't want to buy one. Tomorrow I will raise the light a few more inches, replace the 4-fan azoo unit with a pair of larger clip-ons and assemble a skirt with ventilation slits for the top of the tank. If it's still too hot then perhaps I will be forced to invest.

My fans come on at 80. They actually can hold the tank at 80 for more than an hour but they can't bring it back to my desired 79. I don't want them running all day and I also don't know if over longer periods/hotter days it will climb higher.

I did mount the fridge over the stairs next to my topup bucket tho. It sure looks sexy haha! But before anyone asks for a ghetto shot...I moved the bucket to the other side of the wall so they're both out of the way lol.

Greenmaster · #**253** 08-06-2010, 06:51 AM

Quote:

Originally Posted by lastlight

Thanks. Yeah unbelievably a bangaii I had bought also jumped. I give up on new fish until I have a canopy made.

The canopy will fix my issue with this new light blinding everyone in the room.

My other issue is the intense heat. My fan unit can't cope with it and I took a stab at the bar fridge chiller today before failing...and then reading more online and finding that they don't really work for ANYONE.

So the good news is I have line plumbed into my basement for a chiller but I don't want to buy one. Tomorrow I will raise the light a few more inches, replace the 4-fan azoo unit with a pair of larger clip-ons and assemble a skirt with ventilation slits for the top of the tank. If it's still too hot then perhaps I will be forced to invest.

My fans come on at 80. They actually can hold the tank at 80 for more than an hour but they can't bring it back to my desired 79. I don't want them running all day and I also don't know if over longer periods/hotter days it will climb higher.

I did mount the fridge over the stairs next to my topup bucket tho. It sure looks sexy haha! But before anyone asks for a ghetto shot...I moved the bucket to the other side of the wall so they're both out of the way lol.

At what temp does your heater come on? If the sensor is a little old it is possible that it's off by a degree or two... I would check to make sure that your heater turns it's self off at a decent level... I have heard of them coming on and heating while the other is trying to cool... doesn't ever turn out too well...I don't know what you were trying to do with the bar fridge but I think you should be able to make something work with it... I have a bunch of ideas popin' into my head as I type this.

lastlight · #**254** 08-06-2010, 06:55 AM

Ah what the heck here's some lame iphone snaps of the ghetto action. Please take special note of my high-tech flow restrictor.

Greenmaster · #**255** 08-06-2010, 11:53 AM

Can you post a pic of the inside of your fridge? Showing your cooling coils or what ever you got going on inside? Also is that your tank water or is it a closed loop system that is separate from your tank water?

muck · #**256** 08-06-2010, 02:28 PM

BWAHAHAHAHAH... love the flow restrictor Breet.

lastlight · #**257** 08-06-2010, 03:33 PM

Those lines are my tank water. It's a closed loop and it enters the fridge and goes into an ice-cream pail of water that sits inside the fridge. I didn't buy enough hose so the actual loop inside the fridge is only maybe 6 feet long. I know it might work a little bit if I went out and got say 30 more feet and added to my loop but after reading it's pretty obvious this hose insulates VERY well.

The compressor on the fridge also gets crazy hot and It was hot the entire time it was running. Most people that make these things report the fridge burning out pretty fast as they aren't meant to run non-stop like they end up doing.

mseepman · #**258** 08-06-2010, 03:52 PM

Take a look at J&L's site under chillers. They have a blow-out price on the 1/10HP Pacific Coast chiller right now. Would work well for you and you can't beat the pricing.

Lance · #**259** 08-06-2010, 04:44 PM

Quote:

Originally Posted by muck

BWAHAHAHAHAH... love the flow restrictor Breet.

Hey! I like it. I've got two the same on the frag tank.

Lance · #**260** 08-06-2010, 04:48 PM

Brett, are your fans blowing across the surface of the water or venting the air from the light? If not, try aiming the fans at the water surface. Evaporation works quite well.