320g build/journey/experiment DIY :-)

[Greenmaster]

This is a DIY rock tutorial I made...

http://www.youtube.com/v/hboNJHlgOvc&hl=en_US&fs=1&

http://www.youtube.com/v/wndkovV8DpU&hl=en_US&fs=1&

http://www.youtube.com/v/cgI3aiMCJyk&hl=en_US&fs=1&

http://www.youtube.com/v/We95IFct7R8&hl=en_US&fs=1&

http://www.youtube.com/v/OXxyvNZJOaY&hl=en_US&fs=1&



Some things of note.

-With the formula I have you need to let the molds sit for 48 hours to cure properly. If you want it stronger (also it will be less porous and heavier) you can remove the salt from the formula or add extra cement.
-You can't make things too thin or they will brake.
-Will flake lots of stuff off (using more cement stops that)
-You can use sand as the medium for molding your rocks in.
-If you use balloons for making shapes you need to make sure you take out the balloons when done. (some times the balloons pop and you have to chisel the balloon out or just through out the rock)
-The oyster shell can be substituted by aragonite sand or crushed/pieces of coral. (It is not anywhere near as porous but is way stronger... but I would prefer to use no salt or more cement then aragonite or crushed coral)
-After being made it needs to soak for up to 2 months to make sure most of what can leach out has leached out. (with a proper set-up you could possibly do it in 1 month or less with the formula I have used as there is lots of water flow through the entire structure... a downside of that is there is much less anaerobic areas in the rock turning nitrates to nitrogen... most tanks don't try to do that process anyways, on the upside there is lots of aerobic area for turning ammonia/ammonium all the way into nitrates... and that's the most important part of the nitrogen cycle in most tanks.


Formula:

-3 Parts washed crushed oyster shell (can be picked up at almost all feed stores, very inexpensive... in a city you might have to go to the edge of town as not many people in cities keep chickens )
-1 Part Aragonite sand (picked up at most fish stores can be substituted for pool sand or removed from the formula all together... I like to keep it in there)
***Edit*** (now I would not use less then 1.5 parts of White Portland Cement, it needs it for the strength and to prevent it from degrading as fast in the water.)
-1 part White Portland Cement type 10 or general use (can be picked up at some places where cement supplies can be purchased. You can use the gray stuff as it is cheaper and easier to find, but I have heard that it takes longer to cure and it doesn't look as good IMO, also to make your rock stronger you can add extra cement to your mix... makes it slightly less porous and slightly heavier... would also make more anaerobic areas)
- 1 part Course Rock Salt. (I used water softening salt it can be purchased at some grocery stores as well as at some appliance stores and some hardware stores... also very cheap... can be removed from formula to make rock stronger... also makes it less porous and heavier... also makes slightly more anaerobic areas)

I put my DIY rocks in the ocean on the 20th and will be pulling them out July 11th.

[Greenmaster]

This is my custom tank. The long awaited arrival... now I have a lot of work ahead of me! I put my kids and wife in the tank to give more of an example on dimensions.

Top View


Side View


Front View

[Greenmaster]

Some updates as I work on the tank...
I taped off where my tank is going to be so I could silicone without stinking up my house or affecting my young children.


My door for getting in and out of my taped off area is the window.


The acrylic overflow... I bought the 2 pieces this afternoon glued them together then added it to my tank. The two left bulkheads are in the overflow the right one isn't.


A look at the full height of the chamber.


And my little helper that has to always be in the photo

[matinbc]

Well done! Cant wait to see the rest! Good work on the photo shoot along the way.

[Greenmaster]

Originally Posted by Skimmer King

MMMMMMMMMMMMMMMM looks fantastic Green hows is the LED light doing

sore subject... turns out my dad fried about 90% of them... that's the problem when you let your dad live in your house... doesn't always think before he does stuff. oh well.

Originally Posted by matinbc

Well done! Cant wait to see the rest! Good work on the photo shoot along the way.

Thanks... but any ideas on what I should do with my extra pump?

[Lampshade]

Sorry to hear about your LED's, that's rough. The injuries are not good either, but bodies heal faster than the wallet sometimes :S.

If you want a thermal shutoff for your LED's there's some decent options, I've been looking at making an Arduino controller for my future LED's and putting a few thermometers on the heatsinks to set at 130°F to shut off the LED's. can get an arduino for $15-$20 off ebay and the thermometers are about $3 a pop, pretty cheap and would let you play with the LED's a lot, and have the safety shut off coded in.

Tank looks great, can't wait to see what it looks like with fish/coral in there. The rock is amazing.

[Greenmaster]

I plan on getting an apex and having it do the same thing... Only have the temp set at around 100F... but I'll change the temp if it's shutting it off.