![]() |
#11
|
||||
|
||||
![]() No not drilled. How hard is it to drill them?
|
#12
|
||||
|
||||
![]() Quote:
|
#13
|
||||
|
||||
![]() To bad they are Selling it in Vancouver and I am in Calgary.
|
#14
|
||||
|
||||
![]() ya sorry, didn't even notice. There is always lots in the FS threads so keep an eye out. even if u buy a couple here and there. I wouldn't purchase and dry rock locally as it was expensive from my experience. Online seemed like a nice source though. Sounds like you have had some nice luck in this thread already.
Hope everything works out for you!
__________________
65 gallon saltwater tank, 60lbs live sand, 85lbs live rock, 2 ocellaris clowns, spotted goby, Flame hawkfish, scopas tang, numerous corals ![]() |
#15
|
|||||
|
|||||
![]() If you want a top notch skimmer, I have a EuroReef RS180 with new pump and impeller. It will do 180gallons without an issue. If you do some research you will find these to be sought out skimmers and top quality.
PM me if interested. I am firm on the price ($250), but if you want it is ready to go.
__________________
![]() Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk |
#16
|
||||
|
||||
![]() Quote:
__________________
90 gal, 30 gal sump, T5 lights Just getting into simple corals. My wife already hates my new hobby! ![]() |
#17
|
||||
|
||||
![]() Welcome! be patient. You are in Calgary, there are always lots of good stuff for sale in Calgary and at very good price.
|
#18
|
||||
|
||||
![]() Hi Bryce, I will be in Calgary on Friday, are you working and till what time. I might need some computer work in the near future
![]() |
#19
|
||||
|
||||
![]() I work until 6pm on Friday. I live in the se. call me when you get to town 403-477-6101
|
#20
|
|||||
|
|||||
![]() Well, I've never drilled a tank myself, however i know there are people in calgary with the know how and proper drill bits to do it. For the most part and the general correspondence on Canreef it only costs a case of beer to have the holes drilled from a fellow reefer.
It's just my opinion, but it might be a good starting point to have the tank(s) drilled, sump tank built or installed. These are relatively inexpensive things to do since you have the tanks already. I know you're on a budget, however, there is a lot of up front cost to get going so maybe put the refractometre/ LR on the back burner for now. Start going through all of the build threads and different things people have done with their setups. I've thrown away so much money just from jumping into a piece of equipment or Livestock that just wont work. I suspect a lot of people on this website will tell you the same. Learn from our mistakes! Can't wait to see it come together, have fun! derek |