Tank to Sump Plumbing, Return pump, Flow rate

[Lance]

Originally Posted by SeaSerpant

Thanks Lance.
I've been trying to find a sump on sale but i can't seem to find one in my area thats not for sale with the tank or having to wait until the tank is done and i don't want to be spending 300$ on a new one!

Thanks
SeaSerpant

Ok, if that's the situation go ahead and start the tank without the sump. Keep the water level below the overflow and set up your powerheads. Do you have a skimmer?

[mark]

If noise a concern, think about drilling for 2 bulkheads for your drain then you can set up a Herbie. Might also want to drill your display for a return line, little cleaner and easier for a hood/canopy rather than going over the top.

Surprised $300 for a sump, should be able to get a used aquarium cheap (20g here or 30g here) a few few pieces of glass cut for baffles (~$20) and a bit a silicone and you're done.

[Bloodasp]

There is a 30 gal that was posted at kijiji edmonton a few mins ago for $40.
http://edmonton.kijiji.ca/c-pets-acc...AdIdZ207820227

[SeaSerpant]

Lance
I do not have a skimmer yet.

Mark
I got it drilled for the overflow but i can't get it drilled for a return line.

Bloodasp
Thanks for the notice!

Thanks Everyone
SeaSerpant