Where to get a case of silicone for tank.

[shrimpchips]

Acklands Grainger will have all the construction grade silicones you need for your tank:
http://maps.google.ca/maps/place?hl=...90058500095657

[zum14]

Originally Posted by shrimpchips

Acklands Grainger will have all the construction grade silicones you need for your tank:
http://maps.google.ca/maps/place?hl=...90058500095657

Ive never tried them, ill call and ask, Thanks!

[lastlight]

Here's a great read on silicones. I read the whole thing one night it gets heated! But from here and reading over the past few years I hear a ton of good things about the GE RTV 108. I have heard of many using the 1200 tho as well.

http://www.monsterfishkeepers.com/fo...d.php?t=118131

3M also has a new silicone for marine applications I am going to give it a go on my next tank. Once cured it should be fine I believe it's an RTV type silicone. It's about $12.00 a tube clear only and I mean really clear.
Bill

[zum14]

Originally Posted by bvlester

3M also has a new silicone for marine applications I am going to give it a go on my next tank. Once cured it should be fine I believe it's an RTV type silicone. It's about $12.00 a tube clear only and I mean really clear.
Bill

Ill do some research on that, this tank im building though is already going to be a "test" so I want to eliminate the silicone as a possible and go with a tried and tested. Thanks for the info though.

[AllClearPG]

Canadian Tire has tubes for $6.99 clear or black. Any silicone is 'Aquarium Safe' once dry, btw... Just don't use anything with a latex base. While it's fine and will not result in toxic leeching into your tank, I have not had much success in repairing leaks with it over time. It seems to break down if it has long-term immersion, whereas silicone does not (if done right). There is an AB aquarium manufacturer - who needs not be mentioned - whose silicone jobs are consistently terrible, and anytime I repair a tank, it is invariably one of his... Make sure you squeeze out any air bubbles to get a good seal, and you'll be fine.

Cheers!

[zum14]

Originally Posted by lastlight

Here's a great read on silicones. I read the whole thing one night it gets heated! But from here and reading over the past few years I hear a ton of good things about the GE RTV 108. I have heard of many using the 1200 tho as well.

http://www.monsterfishkeepers.com/fo...d.php?t=118131

Ya Im a member there as well, read that one. I dont think its possible to have an opinion thread without an arguement ensuing. Thanks for the info though. Going to phone Acklands in the am and see if they have the GE1200. Will use one of the alternatives as a backup.