![]() |
|
View Poll Results: What test kit do you use? What alkalinity do you keep? | |||
Salifert <7 dKH |
![]() ![]() ![]() ![]() |
0 | 0% |
Salifert 7-8 dKH |
![]() ![]() ![]() ![]() |
4 | 4.55% |
Salifert 8-9 dKH |
![]() ![]() ![]() ![]() |
16 | 18.18% |
Salifert 9-10 dKH |
![]() ![]() ![]() ![]() |
8 | 9.09% |
Salifert >10 dKH |
![]() ![]() ![]() ![]() |
4 | 4.55% |
Elos <7 dKH |
![]() ![]() ![]() ![]() |
0 | 0% |
Elos 7-8 dKH |
![]() ![]() ![]() ![]() |
6 | 6.82% |
Elos 8-9 dKH |
![]() ![]() ![]() ![]() |
10 | 11.36% |
Elos 9-10 dKH |
![]() ![]() ![]() ![]() |
10 | 11.36% |
Elos <10 dKH |
![]() ![]() ![]() ![]() |
1 | 1.14% |
High end kit (LaMotte, Hanna, etc) <7 dKH |
![]() ![]() ![]() ![]() |
0 | 0% |
High end 7-8 dKH |
![]() ![]() ![]() ![]() |
2 | 2.27% |
High end 8-9 dKH |
![]() ![]() ![]() ![]() |
5 | 5.68% |
High end 9-10 dKH |
![]() ![]() ![]() ![]() |
1 | 1.14% |
High end >10 dKH |
![]() ![]() ![]() ![]() |
0 | 0% |
Lower end (API, Hagen, Instant Ocean, etc) <7 dKH |
![]() ![]() ![]() ![]() |
2 | 2.27% |
Lower end 7-8 dKH |
![]() ![]() ![]() ![]() |
8 | 9.09% |
Lower end 8-9 dKH |
![]() ![]() ![]() ![]() |
5 | 5.68% |
Lower end 9-10 dKH |
![]() ![]() ![]() ![]() |
7 | 7.95% |
Lower end >10 dKH |
![]() ![]() ![]() ![]() |
4 | 4.55% |
Multiple Choice Poll. Voters: 88. You may not vote on this poll |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() I aim for around 7-9, I like to keep it closer to 9 but the tank likes to be around 7 it seems.
I too bought the elos kit after people were complaining about the salifert. I got pretty much the same readings for both elos and salifert. And the elos kit had incorrect instructions which I wasn't impressed with so I've stuck with salifert.
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#2
|
|||||
|
|||||
![]() I voted 8 to 9 dkh with both Salifert & Elos. No particular preference. All through the '90,s and into 2000, I always used the cheaper FastTest or whatever the name was. Measured the same as the Salifert I used. Could buy the kits for $10 but dont see the anymore.
I like API for phosphate and nitrate, so may switch to them, as I see you guys say they make alk. test kits also.
__________________
Doug |
#3
|
|||||
|
|||||
![]() with my elos i get a reading of 6
with the API i get 8 too big of a difference??\ anyone else see different results? |
#4
|
|||||
|
|||||
![]() I have lost faith in Salifert alkalinity test kits. They really seem to vary. The one I have now reads 2 dKH lower than the Elos and the Hanna Colorimeter, and the Salifert alk kit I had before that read 3 dKH lower. That's pretty frustrating.
Thanks for voting everyone! Lots of interesting information here...everyone is all over the charts! |
#5
|
|||||
|
|||||
![]() I've used both salifert and elos. I never noticed noticed a big difference between the 2 and prefer to use salifert but it isn't always easy to get
|
#6
|
|||||
|
|||||
![]() i have never used salfert. except for \mg and it seems to be a pain to use IMO compared to elos or API
dont know about the other tests like Ca. how easy is it to test ca or k with salfert vs elos |
#7
|
|||||
|
|||||
![]() Just so I know where to vote, where do you rate the seachem test as for high end, low end? Thanks.
|