150 Gal SPS Tank Journal *Pics of New Lighting*

[cuz]

taggin along!

[viperfish]

I skipped a few posts on the stand build but all went well and it's finally done. Thanks Rick for helping me move this sucker, I swear the stand weighs almost as much as the tank! One thing to keep in mind on a deep tank build is the doorway it has to go through. I had a totally different plan for this stand until I realized the space limitations of the doorway and things had to change. Well here it is moved into place in the living room.



I had one of the Welders at work fab up a couple of hangers for the lights out of HSS steel tubing. I acouple of coats of Tremclad and they're good to go.

Instead of doors I had black acrylic cut to size and used 3/8" aluminum C channel and magnets to hold them in place.

I didn't want to drill into the steel hangers to hang the lights because of humidity and rust so I built a slide on hanger made from oak and HSS sleeves so I could screw into the wood instead. This also gives me room for adjustment, and pulling the entire assembly down is that much easier.

[viperfish]

Time to hang the lights. My light fixtures of choice are the Aqua Medic 48" 2 x 250w, 1 x 150w hanging fixture, and the Aqua Medic 4 x HO T5 Oceanlight.

First one to hang is the T5. I chose this fixture because the MH will barely cover the 30" front to back, if I threw more metal halides at it I would need a chiller so I opted for the T5's in the front and I'll place my less demanding corals there. here are some pics of the T5 fixture.



Individual contoured reflectors with moonlights!



The splash guard slides in and out without having to remove any screws.



Actinic



Daylight



Here is the hanging kit, it has the ratcheting style fitting and safety screw at the base.



Here is a shot of the metal halides and HO T5's mounted.

[viperfish]

Plumbing is as complete as I can get it for now. Simple Herbie overflow and inlet through two 3/4" bulkheads with Loc Line. Hopefully tomorrow I can start the big move.









For this build my Wife wanted me to leave the back clear. I am very skeptical but what the heck, considering her tolerance for my obsession with this, I'll humor her with one request. It has created quite a challenge with plumbing and wires. Worst thing is if I don't like it I'm going to have one heck of a time covering the back with everything in place. Oh well, we'll see how it looks when it's all done.

[viperfish]

A bit of a change of plans. The location I had my tank in was a little too unstable for my liking. I had the tank about 3/4 full of water and there seemed to be too much deflection in the floor so I decided to move it to the opposite corner where I had an exterior wall and main beam intersecting. My living room was full of salt buckets and one large rain barrel, not winning any points with the Wife for sure. I also decided to paint the back. It was bugging me not having everything hidden so out comes the Krylon. The rest of the setup went fine. Here are some pics of the progress to date. I still need to set up my dosing pumps and water change tank but everything else is fully functional.

[reefbyremote]

Looking good Rod! I like how the sump looks so clean and clearly well set up. I can see this tank is going to be great, and hard to imagine, nicer than your 90.

[Scubasteve23]

Wow..looks Great Rod, cant wait to come over and check it out when its almost done..or done..lol

[Red Coral Aquariums]

[quote=medhatreefguy;519275]Plumbing is as complete as I can get it for now. Simple Herbie overflow and inlet through two 3/4" bulkheads with Loc Line. Hopefully tomorrow I can start the big move.








The emergency and the( overflow with the gate-valve) need to drain separately. You will get a loud gurgling sound.

Kevin

[viperfish]

Believe it or not it works like a dream, dead silent. All I hear is a slight trickle of the water running into the overflow. I tried closing the gate valve until the emergency line kicked in and it does make a gurgling sound then. Whatever the logic it works fine. By the way Kevin, I'm very impressed with the tank. Nicely done.

[RedSea130]

The Tank looks awesome Rod!