![]() |
|
#1
|
|||||
|
|||||
![]() Quote:
From what I understand, the advantage to RO/DI is that you start from a know basepoint (i.e. pure H2O). Your tap water may actually have beneficial levels of some salts but water in, say, Ontario may not. So if we all want to share information it needs to have a common reference point on which to start talking about salts, additives, etc. Otherwise, we all go off on our own and see what works. I'm far from an expert on this but my thought is that no salt is going to give you consistently perfect seawater for every kind of setup. Each tank is different and has different requirements. Our job as aquariasts is to monitor those needs and adjust accordingly to provide the best environment we can and I think that means we all have to use at least SOME additives to get the job done.
__________________
-Mark 29 Gal Bowfront w/24" LED Lights. DIY HOB Sump (5.4 Gal) MP40. Orange Spotted Watchman Goby, 2 Clownfish and a few hermits. |
#2
|
||||
|
||||
![]() There is an article floating around about DIY Ca, Alk and Mag suppliments, it is easy to do and if your tank sucks up the Ca etc quickly this will save you a ton of money over the long run. Even the most expensive salt mix will need supplimentation as any extra calcium etc will be used up quickly. You may want to consider kalk as well.
Doug |
#3
|
||||
|
||||
![]() I dosed calcium for the first time yesterday with the advantage calcium powder and its back up to 400ppm so I will continue to test to see how fast it's depleted. My alkalinity is up abit too now (about 6.8-7dkh) since using the reef builder. Everyone is doing fine, so I will continue to check daily until I get a trend of some sort.
|