O.C.'s Pellet questions and answers!

[globaldesigns]

Hey Ian,

Can you tell me how many litre bags I need to buy in order to get my free bag, remember I got one litre initially through Tony, than order 2 more Litres through you and again delivered to Tony.

Do I have to 1 or 2 more bags for the freebee, I can't seem to find the threads...

Thanks,

Rick

[OceanicCorals-Ian-]

Originally Posted by globaldesigns

Hey Ian,

Can you tell me how many litre bags I need to buy in order to get my free bag, remember I got one litre initially through Tony, than order 2 more Litres through you and again delivered to Tony.

Do I have to 1 or 2 more bags for the freebee, I can't seem to find the threads...

Thanks,

Rick

The first bag was purchased by Tony so naturally he would get the credit for that one, the other two you purchased would most definitely go towards our promotion. You need to purchase two more 1000ml bags and you will be entitled to another 1000ml free.

Ian
O.C.

[globaldesigns]

Originally Posted by OceanicCorals-Ian-

The first bag was purchased by Tony so naturally he would get the credit for that one, the other two you purchased would most definitely go towards our promotion. You need to purchase two more 1000ml bags and you will be entitled to another 1000ml free.

Ian
O.C.

K, I will contact you guys next week to order more and take advantage of the promotion, save 3L for me.

Have a great weekend.

[OceanicCorals-Ian-]

Originally Posted by globaldesigns

K, I will contact you guys next week to order more and take advantage of the promotion, save 3L for me.

Have a great weekend.

Done!

[DiverDude]

So after reading all this, I'm still not clear on what people are running to get the TLF 150 unit to churn properly.

From what I can gather you:

-Use an MJ1200
-Remove the bottom plate
-Remove BOTH pieces of foam
-Run full flow

My plan (since I have just ~35 gal of water volume) is to run around half a litre of pellets with this setup in the hopes that it'll churn nicely.

[OceanicCorals-Eugene-]

Originally Posted by DiverDude

So after reading all this, I'm still not clear on what people are running to get the TLF 150 unit to churn properly.

From what I can gather you:

-Use an MJ1200
-Remove the bottom plate
-Remove BOTH pieces of foam
-Run full flow

My plan (since I have just ~35 gal of water volume) is to run around half a litre of pellets with this setup in the hopes that it'll churn nicely.

To get the TLF 150 reactor to work with the biopellets this is what i would do,
-remove the foams
-keep the top and bottom plate in
-mesh mod both plates and add the pellets in
-Get a MJ1200
-TLF ballvalve 1/2" on the input of the reactor (this allows you to fine tune the tumble to your liking) i run mine on full blast.

for a 35g tank i would just use 125mls worth of biopellets but you can go up to 250mls if you want.

That is what i do with my biopellet setup using TLF150 and it tumbles nicely. heres a video of it.

[DiverDude]

Ok, cool. Thanks for the video.

Ummmm talk to me about this "mesh mod" -do you have this material ? Maybe I can add enough to mod my reactor and ship it with my pellet order ?