How do you "control" your reef tank?

[Bryan]

You don't, your tank "controls" you

Originally Posted by Milad

I'm looking for some ideas on how to "control" my soon to be tank.

[Bloodasp]

I'm slowly setting some my automation. Mostly DIY, mostly because I have a lot of resistors, capacitors and other electronics components lying around, though I must admit I am too lazy to do any microcontroller programming so most of the ones I am doing are pretty basic.

[lorenz0]

relying on something automated is how problems occur. observe everything and make it a routine to keep up on everything.

thats my opinion. the more technical something gets the more you will be hitting the bottle

[freezetyle]

Originally Posted by lorenz0

relying on something automated is how problems occur. observe everything and make it a routine to keep up on everything.

thats my opinion. the more technical something gets the more you will be hitting the bottle

I agree to a certain extent. As long as your still checking on things to make sure that they are working properly and that everything remains constant your good. It's makes dosing and top-ups a lot easier and consistent which is nice.

[Bloodasp]

That's the thing many people think by automating everything that it just becomes set it and forget it sort of thing. The whole idea is your role as far as the work goes has become supervisory rather than being the worker. It relieves you of the tedious and time consuming work but you still have to be on top of it otherwise it will definitely malfunction at some point.

[Nanoized]

Originally Posted by lorenz0

relying on something automated is how problems occur. observe everything and make it a routine to keep up on everything.

thats my opinion. the more technical something gets the more you will be hitting the bottle

My controller is used as a safety backup as well ie the temp of my tank gets too high, lights shut down

[kien]

I control my reef with a Profilux controller. I don't have any experience with any other controller so I can't really comment on the others, except maybe to say that they are all pretty much on par in terms of features. Can't really go wrong with any of the commercial ones on the market.

Here's what my profilux does for me:

* Controls all lights (daylights, sunrise, sunset, moon lights, lightening storms)
* Monitors and controls temperature. Temp too low, turn on thermometer, temp too high, turn off thermometer, turn on fan. No more stuck heaters!
* Monitors pH, Salinity, ORP.
* Performs Automatic Water Top off and Salinity control. If more water is needed and the salinity is a bit low, pump water in from saltwater mix, if salinity is okay, pump water in from fresh water storage.
* Daily email reports on all monitored parameters and settings (lights, etc).
* emailed alarms if a parameter is out of whack
* Tunze powerhead control (up to 4). No need to buy a separate tunze powerhead controller. Allows you to run the tunze powerheads any which way you like (constant, random, reef crest, etc).
* controls doser to maintain stable Alkalinity and Calcium.
* iPhone native app coming soon!

* I am right in the process of setting up an automatic water change utilizing a couple of float switches with the profilux

Again, I have no experience with the other controllers but I sure do love my Profilux

[Tom R]

I control my reef with a ProfiLux controller. This is one serious piece of equipment.

Tom R

[TJSlayer]

I just recently purchased the the Reefkeepr Lite from J&L with an extra power bar, this give 8 controllable outlets, plus can be expanded on. Good economical way to get started, and they offer a great upgarde path to their elit controller if you wish to get all the bells and whistles down the road (That has to be done through them though)

Haven't recieved it yet, but have been thinking about one for many months.

I will not put everything on the controller, just lights, heater (as a backup) and probably some pumps. Skimmer, fuge light, reactor pumps and refugium pump will be on a regular power bar. But in time may decide to bump those up as well.

Not the fanciest controller around but a economical alternative to give you a start...

TJ

[whatcaneyedo]

For ATO I use a Tunze Osmolator, for feeding a Ehiem automatic feeder and for supplementing a Precision Marine calcium reactor plus a DIY kalkwasser reactor. Everything else is handled by a Neptune ACIII. You can find more information on them here http://www.neptunesys.com/index.php?...d=11&Itemid=40 Rather than list out the details I'll just say that I'm taking advantage of nearly everything that it can do from general lighting control to water-on-the-floor sensors and text message alarms.