![]() |
|
#1
|
|||||
|
|||||
![]() I have looked at these pumps but when I factor in 6'+ of head pressure the flow rate is approx 1000 l/h or 264 g/hr........Do they have larger pumps than what I could find? I found the 634gph and a 792gph.
I have noted that with all my pumps and I have installed rubber feet with all of them ......the Quiet One 9000 even suspended does not change the sound it makes one bit. Thats a good point though....I had the Mag 24 vibrate up against the glass and was restricting the inlet......now that was loud.
__________________
Es355lucille & KissMyWrasse's 140g Main Tank 55g Sump http://www.canreef.com/vbulletin/showthread.php?t=51996 ![]() |
#2
|
||||
|
||||
![]() My AquaEuro USA pump sounds like a city transit bus. Holy crap! I thought the vibration was going to crack my little sump!
Anyways, like most things in the hobby... You get what you paid for. Go with the Red Dragon or Tunze. |
#3
|
||||
|
||||
![]() Hey guys..since this thread was already going I thought I would use it for my pump sound problems.
Here's the issue. Just installed a chiller in my RedSea Max 130D (RSM). The shop said to pair up a Danner magdrive 350 with 300gph at 0' Head. The Chiller is rated to a maxflow of 260gph...they said that the difference in flow would be nill once you factor in the Chiller. So I rigged everything up. Managed to fit the pump in the back of the RSM. Turn everything on and so begins the noise. The pump is emitting a deep hum (sounds like my old 10g freshwater setup). I do not have a sump so hanging it in their is not an option. I have a cabinet so it could go next to the chiller if it will make less noise out of the water (haven't attempted this as I don't want to go through the replumbing to end up no farther ahead.) So what are my options...I need this thing quiet. ....would hanging it in the cabinet work? or a different pump? Are canisters quieter and worth the cost (not much money left after the chiller...ouch) thanks! C Last edited by cdp; 05-20-2010 at 02:27 PM. |