![]() |
|
#1
|
|||||
|
|||||
![]() Quote:
![]()
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#2
|
|||||
|
|||||
![]() But a bathtub is supposed to be re-enforced with an extra or two 2x10 joists under the floor. The same with a toilet or anything else heavy and stationary in a house.
|
#4
|
||||
|
||||
![]() yup they are but they should also be cross braced better to transfer more of the weight to the neighboring joists.
Bill |
#5
|
|||||
|
|||||
![]() I have 150g (4' x 2'6") with a 50g sump so about 180g total water volume, set up on a outside wall and perpendicular to the floor joists (2 x 10) @ 16" centers with no issues at all.
|
#6
|
|||||
|
|||||
![]() I know my floor creaks, snaps, and groans for some time after someone's had a bath. The house is new and I'm not worried about it but it goes to show that the forces involved are having an effect.
Like I said earlier though my guess is that it's OK. But for the love of goodness don't listen to ME because I tend to learn everything the hard way through the school of hard knocks. I always heard the addage that 75 gallons was a pretty good threshold for a tank on an upper floor. Not sure what it was based on. But the premiss was that 75g and under was never an issue, anything above 75g should have a little forethought put into it (ie., not necessarily "don't do it" but at the same time, do consider the variables). Having said that, I've never heard of a tank causing a floor to catastrophically fail and contents of said floor relocated to the basement in a free fall sort of way. More likely though water spilling can drip through and cause different sorts of problems (mold in carpet underlay or in walls, or hardwood swelling, etc.).
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#7
|
||||
|
||||
![]() Thank you so much to all of you for all your help I didn't expect so many to answer my little question so again I really appreciate all your help. I will let you all know with pictures if all turns out well. Right now I just have a 33gal LR and Fish tank its pretty but I want my big tank set up in salt
![]() Jenn |
#8
|
|||||
|
|||||
![]() I have a 150g tank with 70g sump in a Mobile Home. No extra bracing, no issues. If you put tank across the joist's, and close to a load bearing wall, you will have no issues either.
__________________
Dan Pesonen Umm, a tank or 5 |
#9
|
||||
|
||||
![]() One more thing i forgot to add is that my contractor told me my joint bent a little when he measure it with his level.
|
#10
|
|||||
|
|||||
![]() ive got my 125gal against an ouside wall with 2X10 joists 16" apart. It sagged the floor a bit. Im not worried about it as we get used to get alot of snow here which is an immense amount of weight and we dont get close to that anymore. Im doing a 250 gal in my living room perpendicular to the joists and against a load bearing wall and will be putting in a support for that one. Saying that though my 46 gal in my kitchen moves more then i care to like. If im sitting in front of my tank and my dogs run by i feel the floor move. Thats up against a load bearing wall too. Id personally at least ask an engineer as they prob dont need to see your house, just know the construction, floor joist size and spacing and weight of the tank and footprint. That should give them an idea. I just dont think id like 1500lbs crashing down on me at 2 am. Just my 2 cents.
Last edited by zum14; 04-05-2010 at 10:47 PM. Reason: i cant spell |