![]() |
|
#1
|
|||||
|
|||||
![]() I would just preform a small test.
Glue an extra fitting to some extra pipe using the same ABS glue you used on the tank. Let it sit overnight and see if you can pull it apart. If you can't pull it apart or it takes a lot of force to do so you'll be fine. Typical PVC pipe applications usually see pressure in the range of 40 to 60 psi. Your tank shouldn't expose it to more than 3 psi so it's a very low pressure application. Also if a leak does start it'll start as a slow drip, the fittings aren't going to just explode open. |
#2
|
|||||
|
|||||
![]() You'll be fine
![]() |
#3
|
|||||
|
|||||
![]() So I gave Oatey a call and I was really surprised how helpful the guy was. He said it will act like a "filler" as it hardens and will initial hold the pipe together but as it expands and contracts over time it will cause leaks as the purpose of the cement is to melt the plastic together. (Pretty much what fkshiu said) He of course would not recommend leaving it that way, plus the color of the cement are very different which could lead to denial if a claim was ever made. I'm going to bite the bullet and redo it, if not just for the peace of mind. I really do appreciate all you help everyone!
|
#4
|
||||
|
||||
![]() Quote:
What would cause it to expand and contract over time? what is the coefficient of linear expansion of PVC over ABS glue It isn't my place to tell you to leave it alone but if you did it would likely be still working fine many decades from now. |
![]() |
Tags |
plumbing pvc abs |
|
|