![]() |
|
#1
|
|||||
|
|||||
![]() '
Last edited by ReeferMush; 04-19-2010 at 02:46 PM. |
#2
|
|||||
|
|||||
![]() This is the light I fabricated from 3/4" aluminum angles, the T5 ballast bellow, and some facia soffit for houses is the top. I cut holes for the special mounting hardware that comes with the coralife mounting legs. I welded together the frame using the DHC 2000 Cobra torch http://www.diversifiedenterprises.ca/ and cut everything with a dremel. I bought the ballast at home depot for 80$ so including the bulbs the whole fixture comes out under 200$ the bulbs killed me on this one with the whole cheapness part, but most of the these parts were laying around so all I really bought was one 10,000k and the angles.
![]() ![]() ![]()
__________________
5.5 Gallon Nano http://www.canreef.com/vbulletin/showthread.php?t=60834 20 Gallon Nano Contest Build http://www.canreef.com/vbulletin/showthread.php?t=61572 Last edited by ReeferMush; 06-08-2010 at 05:36 AM. |
#3
|
|||||
|
|||||
![]() Awesome idea using the sofit has lots of ventilation too. Loookin good dude
__________________
4' custom tank all starfire. End overflow 2 AI sols reef keeper lite mp40wes Diablo skimmer Mag 12 return pump also feeding two reactors |
#4
|
|||||
|
|||||
![]() Ok so as much as I would love to spend the money and get a nice Reef Octopus skimmer or a little bubble king, but I'm cheap and have a Maxi Jet 1200, Sea Clone Collection Cup and about $40.00 so I mean cheap! I bought the acrylic container from superstore and then the rest is plumbing parts from home depot: 3 1/2" to 1 1/2" PVC pipe, three 3/4" Elbows, one Gate Valve (actually from Can Tire) and 3/4" Street Elbow, and 2" of 1" Vinyl Tubing.
![]() ![]() ![]() And now I have fitted the parts and let it run over night ![]() So here is what I woke up to this morning and I'm very happy with the preformance!! ![]() ![]()
__________________
5.5 Gallon Nano http://www.canreef.com/vbulletin/showthread.php?t=60834 20 Gallon Nano Contest Build http://www.canreef.com/vbulletin/showthread.php?t=61572 Last edited by ReeferMush; 06-08-2010 at 05:39 AM. |
#5
|
|||||
|
|||||
![]() The Refugium has been doing a great job just check the pod production and this is in the display tank.
![]()
__________________
5.5 Gallon Nano http://www.canreef.com/vbulletin/showthread.php?t=60834 20 Gallon Nano Contest Build http://www.canreef.com/vbulletin/showthread.php?t=61572 |
#6
|
|||||
|
|||||
![]() I did not expect that sucker to work as good as it seems to. Great job! I would put that on the Ghetto rigs post on RC
|
#7
|
|||||
|
|||||
![]() I've have moved a couple things around in the refugium and the display, and its about time for an update on the tank so check it out.
![]() ![]() ![]() ![]() I've been trying to get a pic of my Hector's Goby and the Mandarin but they're just to shy!
__________________
5.5 Gallon Nano http://www.canreef.com/vbulletin/showthread.php?t=60834 20 Gallon Nano Contest Build http://www.canreef.com/vbulletin/showthread.php?t=61572 Last edited by ReeferMush; 06-08-2010 at 05:41 AM. |
#8
|
|||||
|
|||||
![]() The sump has been doing a good job collecting small sediment and pieces of algea, so I felt like it was time to pull out the sump a give it a good clean.
![]() ![]()
__________________
5.5 Gallon Nano http://www.canreef.com/vbulletin/showthread.php?t=60834 20 Gallon Nano Contest Build http://www.canreef.com/vbulletin/showthread.php?t=61572 Last edited by ReeferMush; 06-08-2010 at 05:48 AM. |