N/P Reducing Pellets ("Solid Vodka") - "Wow" ... 3 month update

[RuGlu6]

Originally Posted by Delphinus

Yeah, now that I've been able to resolve the clumping issues I don't have the mulm buildup anymore. I just had a tiny bit too much pellets for the phosban reactor, that's why I'm telling people now they're better off running fewer pellets than the recommendation because it will still work fine, just run out sooner, but will work better because of the increased mulm shedding.

I want the mulm ! or at least to see how it looks LOL.

[artrye]

I've been running the BioPellets since January, 2 TLF 550 reactors 500mL in each, sponges have been cut in half. Both reactors have a Maxi 1200. I just cannot make all the pellets tumble. Only half of the pellets will tumble and the other half just sits there. Is this fine?
For the time i've had my biopellets, I have slowly taken away the vodka, nitrates and phosphates are @ 0. Excellent polyp extension, clear water, I could not be more impressed with the pellets. Just wondering about the tumbling cause I dont want any type of build up in the reactor. I've tried the full 1L of pellets in one reactor, same result. I've tried a 600 gph, same result. Running out of ideas, maybe I should get a different reactor. Anyone have any suggestions?

[Canadian]

Originally Posted by artrye

I've been running the BioPellets since January, 2 TLF 550 reactors 500mL in each, sponges have been cut in half. Both reactors have a Maxi 1200. I just cannot make all the pellets tumble. Only half of the pellets will tumble and the other half just sits there. Is this fine?
For the time i've had my biopellets, I have slowly taken away the vodka, nitrates and phosphates are @ 0. Excellent polyp extension, clear water, I could not be more impressed with the pellets. Just wondering about the tumbling cause I dont want any type of build up in the reactor. I've tried the full 1L of pellets in one reactor, same result. I've tried a 600 gph, same result. Running out of ideas, maybe I should get a different reactor. Anyone have any suggestions?

Go back one page and read post 223.

Hi everyone,

I have a question. I've been running Zeovit with Biopellets within the same KZ 6L reactor. Have you guys stopped dosing ZeoStart2? I was assuming that since NP Biopellets is already a carbon source, it would be unnecessary to dose Start2 as this would be dosing even more carbon.

For those running a hybrid system like this, please let me know if your doing the same, thanks
!

[OceanicCorals-Ian-]

Originally Posted by Alohatropics

Hi everyone,

I have a question. I've been running Zeovit with Biopellets within the same KZ 6L reactor. Have you guys stopped dosing ZeoStart2? I was assuming that since NP Biopellets is already a carbon source, it would be unnecessary to dose Start2 as this would be dosing even more carbon.

For those running a hybrid system like this, please let me know if your doing the same, thanks
!

We do not recommend running the two together in the same reactor, the pellets need to be tumbled aggressively separate from the Zeolites. I would still dose the Start2 but at a reduced rate.

My problem is that I have a 550gallon system and I'm running almost 3L of Biopellets. It would take a huge reactor and a huge pump to tumble that much. This is why I chose to put it with the zeolites. I can manually pump the reactor and mix everything up 2x a day this way. Is there something you would recommend for running this much NP?

[OceanicCorals-Ian-]

Originally Posted by Alohatropics

My problem is that I have a 550gallon system and I'm running almost 3L of Biopellets. It would take a huge reactor and a huge pump to tumble that much. This is why I chose to put it with the zeolites. I can manually pump the reactor and mix everything up 2x a day this way. Is there something you would recommend for running this much NP?

I would run something like this http://www.oceaniccorals.com/store/i...&productId=134 with a Mag 3 pump, you should have no problem fitting in 3L of media and also keeping them fluidized. You have a rather large system!

[RuGlu6]

Originally Posted by Alohatropics

My problem is that I have a 550gallon system and I'm running almost 3L of Biopellets. It would take a huge reactor and a huge pump to tumble that much. This is why I chose to put it with the zeolites. I can manually pump the reactor and mix everything up 2x a day this way. Is there something you would recommend for running this much NP?

here is good size media reactor for $37 CAD (shipping is +$30)

http://www.reefshops.com/diy-product...he-filter.html
diameter: 21cm high: 38cm 8" inch x 15" high
Would it hold 3L ? but price is sweet though, and looks like ppl on here are are buying from these guys.