![]() |
|
#1
|
|||||
|
|||||
![]() That with taken with your lens
![]() |
#2
|
|||||
|
|||||
![]() Ok so here is the first photo again:
![]() and here is the new one with a few others: ![]() ![]() ![]() Better? Personally I think I like the first frogspawn shot better but I see what you're saying and I got the iso down so I think I'm getting it figured. Except my camera doesn't have the exposure scale in AP priority? Which is annoying b/c all the photos looked fine on the camera lcd but were a little over exposed on the computer so it'd be nice to adjust the exposure just below zero but it'd be nice to see the scale when doing so |
#3
|
|||||
|
|||||
![]() Yes much better, considerably better when you consider that you're closer than the original, it's still a little softer than I would expect though. Are you auto-focusing or manual? Also are you using a remote or timer to trigger the camera?
|
#4
|
|||||
|
|||||
![]() Quote:
Auto and remote |
#5
|
|||||
|
|||||
![]() You could try manual focus and focus on your center DOF which will give the biggest range. I suspect the tank glass is the bigger issue though, I've seen those 10 gallons bow pretty good which could be causing the softer edges.
|
#6
|
|||||
|
|||||
![]() I like the third one nice job.
How do you get F57 is that just the camera mine only goes up to F22 or is that the lens? I shoot a 30D Canon. You could shoot in Program mode that way you can set all your parameters.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#7
|
|||||
|
|||||
![]() Quote:
How do you mean set all parameters in program mode? Like my shutter, etc? |