Frogspawn Macro Photo - Updated with ANOTHER New Shot

[superduperwesman]

Originally Posted by imisky

with the ISO at 3200 thats what is giving the photo its grainy look. i think i would try a setting a little wider than what sphelps suggested at:

ISO: 100/200 (depends if you have highlight priority set)
aperture set at: f4-5.6
shutter speed: whatever gives you a metering of slightly under the center weight.

i take all my photos at f4-8 and usually by f8 i have pictures which are sharp from corner to corner so imo theres really no need for f14-22 in our application when it comes to taking tank shots. Shooting at a wider aperture this will give you alot faster shutter speed.

Highlight priority?

[superduperwesman]

Ok I'm gonna give it another try tonight or tomorrow and I think I can do better but I also think your tank must be better lit then mine?

[sphelps]

Originally Posted by superduperwesman

Ok I'm gonna give it another try tonight or tomorrow and I think I can do better but I also think your tank must be better lit then mine?

Yeah it would be which is why I suggested starting with F/16, that shot above was at F/57!

[superduperwesman]

Dang! Not sure if mine even goes that high?

[sphelps]

Originally Posted by superduperwesman

Dang! Not sure if mine even goes that high?

That with taken with your lens

[superduperwesman]

Ok so here is the first photo again:


and here is the new one with a few others:






Better? Personally I think I like the first frogspawn shot better but I see what you're saying and I got the iso down so I think I'm getting it figured. Except my camera doesn't have the exposure scale in AP priority? Which is annoying b/c all the photos looked fine on the camera lcd but were a little over exposed on the computer so it'd be nice to adjust the exposure just below zero but it'd be nice to see the scale when doing so

[sphelps]

Yes much better, considerably better when you consider that you're closer than the original, it's still a little softer than I would expect though. Are you auto-focusing or manual? Also are you using a remote or timer to trigger the camera?