![]() |
|
#1
|
||||
|
||||
![]() what is your GPD rate? 20 gallons of waste water in 6 minutes are lots . How do you get the water come out of those 1/4" tube that fast? I have mine run on 60 PSI
|
#2
|
|||||
|
|||||
![]() its a 50 gpd unit,
i have the tap turned full and all i get is around 45psi. i didnt think that much water could come out to, but its pretty intense. when i first turned it on the waste line came flying out of the drain and shot water clear across the basement. |
#3
|
||||
|
||||
![]() Did you install the flow restrictor correctly?
|
#4
|
|||||
|
|||||
![]() ??
what would that look like. |
#5
|
||||
|
||||
![]() something like this
http://www.bulkreefsupply.com/store/...-membrane.html |
#6
|
|||||
|
|||||
![]() hmm, i think you might be on to something.
ill post progress. thanks |
#7
|
||||
|
||||
![]() good luck
|