![]() |
|
#1
|
|||||
|
|||||
![]() Lance how are you running the pellets? You should be closer to zero by now. Let me know how you have them and let's see what can do to break through that 10 barrier. Mine levelled off at 10 too as you might recall but literally FELL to zero within days of fixing things.
To give you an idea of what's going on in my tank: 14 fish, fed 5 times per day via autofeeder, plus nori once or twice a day, plus mysis once per day, PLUS frozen krill or whatever the eel eats .. and zero nitrates.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#2
|
|||||
|
|||||
![]() Quote:
Tony, I'm running the pellets in a Phosban reactor with an MJ-1200. 18 fish (65") fed twice a day plus nori once per day. 70g sump with live rock and chaeto, MR-3 skimmer with dual Becketts, Phosban Reactor running Rowaphos and BRS Reactor running carbon. I was dosing MicroBacter7 to jump start the bacteria growth but haven't dosed since I left for vacation.
__________________
225g reef |
#3
|
|||||
|
|||||
![]() You don't need to seed them with bacteria. I took mine offline, cleaned them in tapwater and let them dry out for 3 days and then put them back online and the reactor was emitting zero nitrate effluent within a day.
How much are they moving in your reactor, and do you have any foam or enkamat on the output? Quote:
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#4
|
|||||
|
|||||
![]() Quote:
__________________
225g reef |
#5
|
|||||
|
|||||
![]() How high up the reactor are they running when moving?
If it were me, I'd take the filter right out, and take out enough pellets so that it can run full bore without burping any pellets into the sump. No more than 1/2 - 2/3 up the reactor. And save up for a MR-1 reactor (actually it's pretty cheap all things considered).
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#6
|
|||||
|
|||||
![]() Quote:
They run about 2/3 of the way up the reactor. Where can one get the MR-1 reactor?
__________________
225g reef |
#7
|
|||||
|
|||||
![]() Oceanic Corals sell them http://www.oceaniccorals.com/store/i...&productId=131
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#8
|
|||||
|
|||||
![]() Got mine from Oceanic - http://www.oceaniccorals.com/store/i...&productId=131
There's also a slightly larger version for $20 more (http://www.oceaniccorals.com/store/i...&productId=132 ) if you really want to go nuts (actually I think there are 2 to 3 sizes up technically). I think one could already easily run 2litres of pellets without any output foam in the standard sized one though.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#9
|
|||||
|
|||||
![]() Ordered the MR-1 last night.
__________________
225g reef |
#10
|
|||||
|
|||||
![]() Quote:
holt crap Tony you feed alot i thought that i was bad 3-4 times with flakes and brine
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. |