![]() |
|
#1
|
|||||
|
|||||
![]() I've seen a few similar cases with those fixtures. I don't think you problem is related to your power par, probably just a coincidence. Could be a bad connection or possible a bad ground but it seems obvious to me it's in the fixture.
|
#2
|
|||||
|
|||||
![]() He moves some plugs around on the Power bar and it's obvious it's in the fixture?
It very well could be, but I fail to see how it is Obvious.
__________________
Dan Pesonen Umm, a tank or 5 |
#3
|
||||
|
||||
![]() Ok, so a different power bar didnt work.. and now the 2 bulbs wont work at all. :-( do you think its something loose in the internal wiring? ballast problem? bulbs?
|
#4
|
|||||
|
|||||
![]() take all the bulbs out and put them all back in. I have had bulb placement/seating problems with T5s before. Good luck.
Also, rotate the order of the bulbs. Could be a bad bulb? K. |
#5
|
||||
|
||||
![]() Thanks Kien!
was just a bulb unset. switched their positions a bit an presto-change-o they all work again! was just strange that it was both on the same switch and none on the other... oh well.. first thing ill check next time... |