N/P Reducing Pellets ("Solid Vodka") - "Wow" ... 3 month update

[Coleus]

Originally Posted by burrows14

if needed Ill ship you a replacment oring if you can fix it by monday

Thanks you for your kind offer.

My control valve is between the reactor and maxijet, I don't get leaking from hose, it is from the lid. I open it up and the o-ring is still there. I am going to try put some tape and see if it is still leaking tomorrow, Right now, I tilt it so that the leaking water going into my sump. I also notice by tilting it, i got my pellets bouncing nicely.

[Chin_Lee]

the oring in one of my reactors was a little small than it should be. i had to stretch it out a little bit and then quickly install the oring and screw on the lid in order for it to sit properly. give that a try

[burrows14]

Pm me on monday and let me know because I bought a couple extra orings because I had the sam problem.

Cheers
Ray

Originally Posted by Coleus

Thanks you for your kind offer.

My control valve is between the reactor and maxijet, I don't get leaking from hose, it is from the lid. I open it up and the o-ring is still there. I am going to try put some tape and see if it is still leaking tomorrow, Right now, I tilt it so that the leaking water going into my sump. I also notice by tilting it, i got my pellets bouncing nicely.

[Coleus]

Hey Ray,

Where do you order extra orings?
Thanks

[burrows14]

I got mine from J&L. they dont always have them in stock tho thats why i bought a couple when they did.

Cheers
Ray

Originally Posted by Coleus

Hey Ray,

Where do you order extra orings?
Thanks

[Delphinus]

You can also get O-rings from Rona and Home Depot, but you'll kind of have to peruse the selection to find one the right diameter and thickness..

[Kryptic4L]

you could also try hi-tech seal's

[Chin_Lee]

i saw a healthy selection of orings at Lordco if you have one nearby