![]() |
|
#1
|
|||||
|
|||||
![]() Well I guess some of you guys enjoy living on the edge a little
![]() Simplicity is better as a rule of thumb within reason (a car is still better than a horse) but mechanical floats do fail so I think it'd be pretty foolish to hook up one to an actual aquarium from an unlimited water source, if you've got a separate container for top off which wouldn't harm the tank if it was all introduced that's fine but a direct RO hook up is an accident waiting to happen. A solenoid and a timer can be easily setup for less than $100 which is very cheap insurance considering what has already been invested. Last edited by sphelps; 02-11-2010 at 07:38 PM. |
#2
|
|||||
|
|||||
![]() True dat Steve, the most sage outlook is to assume anything can fail - valve or switch or whatever, and then plan accordingly in anticipation of the what-if's.
I'm not sure a horse is simpler than a car though. I'm a city boy with a wrench, I wouldn't know the first thing to do with a horse but I can tinker in an engine. So to some extent "simpler" might be a matter of perception. ![]()
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#3
|
|||||
|
|||||
![]() Kind of the point, once educated with something far more complicated it becomes simpler because it's the better alternative. But realistically a horse is much easier understand than a car, it's only the surrounding technology that makes the car easier. For example if I send you into the woods with a hatchet, which are you more likely to come back with? A horse or a car?
|
#4
|
|||||
|
|||||
![]() Quote:
"Sometimes, once educated with something far more complicated, it becomes simpler because it's the better alternative." ![]()
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#5
|
|||||
|
|||||
![]() Quote:
![]() |
#6
|
|||||
|
|||||
![]() Quote:
![]() |
#7
|
||||
|
||||
![]() i'm using 2 float switches back to back with a solenoid valve for my reservoir. When the solenoid valve is closed, there is no water coming out the discharge side of my RODI system.
Got the similar setup for my sump. Why 2 float switches? #1 senses low to run on pump/valve and #2 keeps the sump and reservoir from overflowing. |