![]() |
|
#1
|
|||||
|
|||||
![]() Wow! Awesome pic! I use the same camera (canon 30d) and was just wondering what lenses you are using. I am in the market for a decent macro lens.
Ryan |
#3
|
|||||
|
|||||
![]() Great lighting, subject and composition but poorly executed. The shutter speed was too slow for the amount of zoom resulting in fairly obvious motion blur. If this shot was taken in the wild it would be excusable since any amateur photographer would be shaking in fear and the story would compensate for the blur. However since it was at the zoo you could have quickly adjusted the settings or used some kind of brace. I only bring this up because IMO it's clearly not your best work and judging by your equipment and other photos you can do better. Plus this is the photography forum
![]() |
#4
|
||||
|
||||
![]() Thanks Marlain65 I will see when I get time.
|
#5
|
|||||
|
|||||
![]() Quote:
Thanks for the feed back. Dont forget though that the motion blur you are referring to is the fence as it was shot free hand on a spur of the moment threw the fence. He was walking around and only posed for this shot for a few seconds. If I had come there just to shoot I would have brought my tripod and set up to take the best shot possible, but for a hand held shot at a shitty angle on a spur of the moment I think it came out fairly well. I will try the faster shutter speed next time though.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#6
|
|||||
|
|||||
![]() Just remember to use at least double the inverse zoom for your shutter speed, it should be automatically built into your brain so as you zoom in you're increasing your shutter speed accordingly at the same time. You can set your ISO to auto (within a preset range) or adjust it manually for the lighting.
Also keep in mind that 300mm is huge for hand-held, and without a lot of light it'll be difficult to take a fast enough shot. At 200mm the composition would have been equally good and the speed would have been much more manageable. |
#7
|
|||||
|
|||||
![]() Great tip will try to remember that thanks.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#8
|
|||||
|
|||||
![]() Sorry but can you elaborate a little? I'm having trouble wrapping my brain around the "double the inverse zoom" part.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#9
|
|||||
|
|||||
![]() Shutter speed is displayed as a fraction of a second, for example 1/250 of a second. Zoom is in mm, so if you're shooting at 200mm then you should aim for a minimum of 1/400 shutter speed. I maybe should have said double the zoom then inverse. Its just a rule of thumb and of course there are exceptions.
|
#10
|
|||||
|
|||||
![]() Amazing. Thanks for sharing!
|