![]() |
|
#1
|
||||
|
||||
![]() The overflow was only drilled with 1 large drain and 1 small hole for the return from the pump. It is making a sucking noise and at times it will just whoosh and then its quiet until the overflow fills again. Any ideas for the way it is drilled already, because emptying it is not an option.
|
#2
|
|||||
|
|||||
![]() Ahh, you need a standpipe, you don't have a herbie but rather an open drain by the sounds of it.
|
#3
|
||||
|
||||
![]() you are correct it is a standpipe. Any ideas
|
#4
|
|||||
|
|||||
![]() Drilled on the bottom or the back? A picture would help figure it out. I have a single corner drain on the back and came up with a pseudo Herbie that is quiet and works well.
|
#5
|
|||||
|
|||||
![]() Sounds like you need a Durso style standpipe. google Durso, you will find a ton of pictures and writeups how to make them near silent. My Durso on my 45g was pretty close to silent. Herbie is dead silent, but requires 2 holes for drains
__________________
Dan Pesonen Umm, a tank or 5 |
#6
|
|||||
|
|||||
![]() My 155 is drilled in the back, 2 overflows what a racket. So I built 2 Hofer Gurgle Busters and that solve the problem. No I can hear if the sump is low and top it up right away.
This is my thread on it and a link to the Hofer build page: http://www.canreef.com/vbulletin/showthread.php?t=58944 http://home.everestkc.net/jrobertson...struction.html
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build |
#7
|
|||||
|
|||||
![]() Ok seriously we can't read minds:
|
#8
|
|||||
|
|||||
![]() Quote:
__________________
my tank |