110g Mixed Reef V2

[fishytime]

Originally Posted by Delphinus

THAT's interesting (although I think it's technically a "loo" believe it or not). Anyhow of course what happens when that happens is there will be a dip in pressure in your lines but I wouldn't have guessed it would cause TDS to dip as well. I've never tried measuring TDS on the inlet side of my RO/DI so I can't try this myself. I have my "inlet" side after the RO, and my "outlet" side after the DI. So I have no idea what the incoming TDS is (I just know it sucks like 150-250), but the nice thing about setting it up this way is that I can tell when it's time to change the RO membrane and I can tell when it's time to change the DI (even though the colour change ought to be good enough for that I suppose). Also I know when it's OK to stop flushing the membrane (post-RO reading starts off at 90ish usually, and I switch the flush valve over when it drops below 10. It takes a lot longer than I thought it would. Before I had one I would just flush the membrane for like 30 seconds to a minute, since getting the dual meter I learned it's more like 5 minutes minimum..).

Ya, wouldnt a drop in pressure mean a longer contact time with the sensor dewhickey thing?.....you would think that the "in" TDS would be higher???......wow you do lots o stuff with your RO Tony......I havnt done a thing (flush/change membranes) for a year and it still reading 0 you obviously use it way more than I do(before 45g in two weeks, now 50g in two weeks)

[fishytime]

Originally Posted by Leah

You can do better, I know you can. Sigh!!!!

Ok......the TDS post didnt fly:.............*seriously thinkin about smutting it up again*

I shut off all the flow to the tank tonight and snapped these

[IMG]http://i116.photobucket.com/albums/o19/fishytime/IMGP3912.jpg[/IMG





and just cuz Carmen liked my "pretty pink" one so much, heres another shot of it.....look how long the........polyps are

[blueyota]

Nice pics Doug !! is that a poker star monti in the second last pic? I wan it

[fishytime]

Originally Posted by blueyota

Nice pics Doug !! is that a poker star monti in the second last pic? I wan it

It is indeed Shawn...you wanna come visit?

[Delphinus]

Are you reading zero after your RO or after your DI? If the DI isn't spent, your output will always read zero. The risk is you may be using up the DI resin faster. You should try moving your sensors around and see what differences it might make for you.

Also not all membranes are created equal. The one I had before this one was awesome and never read above 10 (until it died). This one I have now has terrible TDS creep. I kept my old one so I know what brand to look for when this one is done. Whether I put it somewhere where I can find it is a totally different matter but has nothing to do with YOUR thread here so I'll stop typing now.

[fishytime]

Originally Posted by Delphinus

Are you reading zero after your RO or after your DI? If the DI isn't spent, your output will always read zero. The risk is you may be using up the DI resin faster. You should try moving your sensors around and see what differences it might make for you.

Also not all membranes are created equal. The one I had before this one was awesome and never read above 10 (until it died). This one I have now has terrible TDS creep. I kept my old one so I know what brand to look for when this one is done. Whether I put it somewhere where I can find it is a totally different matter but has nothing to do with YOUR thread here so I'll stop typing now.

after DI......aw....that means more plumbing parts....so you just have those JG Ts everywhere you can on your RO unit?

So its kinda like a windshield in your car? Once you replace the first one the others seem to chip way easier?

I do love a lovely little clam....thinking bout Tony jogged my brain as I know he too loves a lovely little clam

[JDigital]

That last clam is mighty awesome!

[Carmen]

Very NICE Clams shots there Doug! You have quite the collection growing. Still really LOVE the one with the pretty yellow polyps growing all around it the most! It's just such a neat contrast with the spikey bright yellow beside the purple! Neat shot!

So you must need to frag some pretty pink SPS don't ya?

[fishytime]

Originally Posted by Carmen

Very NICE Clams shots there Doug! You have quite the collection growing. Still really LOVE the one with the pretty yellow polyps growing all around it the most! It's just such a neat contrast with the spikey bright yellow beside the purple! Neat shot!

So you must need to frag some pretty pink SPS don't ya?

I keep thinkin bout scraping the yellow polyps off of there (already did on one side of the clam), but your right that color contrast is pretty sweet

You can have a piece of the pink one anytime your ready....

[fishytime]

feels the need for more distraction pics