Ultra power phos review

[Aqua-Digital]

You can use the full dose of power phos until you reach zero

BUT and this is a big fat but.

You must test by doing a heat test otherwise your results mean, well not a lot really.

Heat a sample of water to 80 degress C (celcius)
allow to cool for 3-5 minutes
test in the normal manner

By doing this you are releasing bound PO4 molecules back into the water for the test solution to absorb.

Once you have zero under heat test conditions you can reduce the amount of phos being used and then look at other regimes such as LNS ultra Lith system.

For the review do not add any bio please as this will give false results.

[Skimmerking]

ok I will stop i have been testing with heating the water at 80F

[Aqua-Digital]

so the results are the ultra phos crashed out the P04 rapidly leaving your sysem PO4 neutral?

if so then continue using it at maintenance levels

Mega fast results but now we must see what this translates to algae issues, and this is why you must continue the test and the use.

[Aqua-Digital]

Heat test is to 80 celcius NOT "F"

please redo

[Skimmerking]

ohhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh:sa d:

WOW I cant believe that I didnt see that this whole time sorry mike.

[Skimmerking]

hey everyone sorry for the misleading infomation I'm sitting at PO4 level of .03 so its not at zero.

[Aqua-Digital]

The power of the heat test

If you do not do a heat test for PO4 you will not know what your value truly is, this is so important and leads people to think algae issues are not PO4 related as they see a zero value. As the above shows, unless you do a heat test you are not getting the true and accurate value.

Ok so carry on as planned using the Ultra power phos to the instructed amount for 7 -14 days or until you get zero reading under heat test conditions.