![]() |
|
#1
|
|||||
|
|||||
![]() It would probably make some difference. Think it's called the "double/quadruple principle", if you double the pipe diameter you get quadruple the potential flow at the same pressures. I'm not sure I'd do the jog. Sorta sucks but it might be worth getting that length of 2" pipe and see how it goes.
![]()
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#2
|
|||||
|
|||||
![]() Christy i'll talk to Craig tonite and see what we had on there. Cause that tank was in my living room in Sherwood park and i never heard it. And i know we did have a reducer on it as we'll.
![]() |
#3
|
|||||
|
|||||
![]() Initally my tank was surging too and I have dual 1.5" and a dart. I wound up having to use 2 drain valves for a while to get increased flow to my sump and that would quiet it down so I would say its definately a flow issue. Go with the 2" it will be quieter and safer.
|
#4
|
|||||
|
|||||
![]() Durso standpipes should be one size bigger than the drain to work properly, so if you're using 1.5" pipe for the drain, your durso standpipe should be 2". This should fix your problem.
FYI many plumbing stores will sell PVC pipe by the foot. |
#5
|
|||||
|
|||||
![]() Quote:
![]()
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#6
|
|||||
|
|||||
![]() Quote:
|
#7
|
|||||
|
|||||
![]() Oh I always thought ABS was bad?
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#8
|
|||||
|
|||||
![]() Durso's will allways make some noise but ya if pipe is to small, it will make more noise.
I will never do another tank unless it's Herbie style. In fact, Combine them for 3 drains. 1 Herbie gate valved, another Durso, full open to take the excess the gate valved one doesn't and a Emergency line. I want to change my tank now, but I can't get behind it to re-plumb my drains ![]()
__________________
Dan Pesonen Umm, a tank or 5 |
#9
|
|||||
|
|||||
![]() Quote:
If you do go Herbie, just don't do what I did... see my post in DIY "Herbie design fail" |
#10
|
|||||
|
|||||
![]() You guys had 1.25" pipe on there. Its hell finding that stuff around here but oddly enough the 1.5" is pretty popular so I went with that. 2" just seemed like overkill to me but my original plans for the dart included a few elbows and PVC. I ended up switching to spaflex and reduced the elbows to just what is in the wavy sea so much more flow than I'd planned on I guess.
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |