![]() |
#1
|
|||||
|
|||||
![]() I want to order glass (diamond bit) hole saws to drill my own bulk head holes. I'm not sure what the hole sizes are for 1.5" & 1" bulk heads though, advice please? I've heard that there is a good website that sells them. Can anyone provide me the name of it?
Thanks, Danny
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#2
|
||||
|
||||
![]() MOPS.ca and Bulk Reef Supplies has them.
Cheers, Vic |
#3
|
|||||
|
|||||
![]() ebay
Different types of bulkheads will require different hole sizes, best to figure out which bulkheads you're going to use then buy the holes saws to match. |
#4
|
|||||
|
|||||
![]() Last two bits I bought came from ebay and they were maybe $20 landed (ie., including shipping). As stated mops.ca and bulkreefsupply.com also sell them as well.
For schedule-40 bulkheads, ie., the black ones the holes sizes would be 1" bulkhead - 1-3/4" hole (45mm) - http://cgi.ebay.ca/45mm-Diamond-tipp...item1c0f8dfe4c 1.5" bulkhead - 2-3/8" hole (65mm) - http://cgi.ebay.ca/65mm-Diamond-tipp...item518fdcd3e9 If you go schedule-80 bulkheads (they grey ones) the hole sizes will need to be bigger because the wall thickness is larger. You don't need schedule-80 in our hobby but some people like grey better as if they are looking at the pipes instead of what's IN the tanks but hey, whatever floats your boat. ![]() I have bought from the seller I linked to. Would highly recommend. Yeah the bits end up coming from Hong Kong but you'll have your bit within 4-5 days, at least I did (I bought from them twice).
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#5
|
|||||
|
|||||
![]() Perfect, thanks everyone. I've decided that I need to drill my own holes from now on, since no glass companies around here will touch them with a 10 foot pole. They sort of look at you funny and say, "your doing what to your fish tank?" I guess the whole aquarium hobby thing is still in the dark ages in this area.
![]()
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#6
|
|||||
|
|||||
![]() Sort of the approach I decided to adopt too, although the reasoning is the drill bits were $20ish, and the labour to have someone do it were $35-50ish depending on who I asked. At those prices for the bits it doesn't matter if I only get a dozen holes out of them before they are too dull.
![]() The trick is keep the bits wet (use plumbers putty or a water reservoir ring), go about 1/4 speed on the drill and very light pressure. You're basically sanding the hole out of the glass not drilling it. And back off the pressure before you're about to punch through, if the glass is going to crack, this is the point where it's likely to happen. >1/4" thick is easy to drill without incident, 1/4" and less it can get a little dicey so it's best to have a scrap piece you can practise on if it's your first time. Also FWIW there are plenty of instructional vids on the net, think even bulkreefsupply.com has some good ones there.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#7
|
|||||
|
|||||
![]() Glass-holes.com is probably what you were lookin for.
__________________
Do you smell that? Just waaalk away...... sloooowly |
#8
|
||||
|
||||
![]() +1 http://www.glass-holes.com/category....3?categoryId=7
Glass holes is were I get all my stuff from they have all your needs when it comes to glass holesaws and bulk heads. cheap too (not the quality thou.) You even get a nice treat when you recive your order ![]() |
#9
|
|||||
|
|||||
![]() What's the nice treat?
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#10
|
|||||
|
|||||
![]() A happy ending???
![]()
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |