WOW Im blown away by the response of my wife. Might need a Controller

[The Grizz]

Not sure what you are trying to acomplish but this is what I did for my 155 BF. I used those Noma block heater timers for each MH and T5 balast. Got them when they were on sale for $8 each bought 6. I use them on all my tanks as they are water proof.

[Skimmerking]

Originally Posted by The Grizz

Not sure what you are trying to acomplish but this is what I did for my 155 BF. I used those Noma block heater timers for each MH and T5 balast. Got them when they were on sale for $8 each bought 6. I use them on all my tanks as they are water proof.

Well Im trying to make it more and more auto for the misses its pretty much automatic now and plus she is having a grerat time taking care of it FINALLY she is starting to love this hobby..... all she has to do is feed and take the brush and wipe of the collection cup of the skimmer the timers was a fluke that the one of the timers that i have the white ones from Canadian tire. its batteries keep the times set.

[The Grizz]

Originally Posted by asmodeus

Well Im trying to make it more and more auto for the misses its pretty much automatic now and plus she is having a grerat time taking care of it FINALLY she is starting to love this hobby..... all she has to do is feed and take the brush and wipe of the collection cup of the skimmer the timers was a fluke that the one of the timers that i have the white ones from Canadian tire. its batteries keep the times set.

OH OK NOW I SEE, I had no idea about the controlers that everyone is talking about. I might have to look into something like this too.

[don.ald]

just wondering, if everything runs off of a single controller, what happens when the controller fails, or the power goes out etc.etc.
any experiences with this senario? to me its like having everthing plugged into one GFI outlet, and when it pops yikes!

[Jason McK]

Mike Mike Mike Just go for the Best and get the Profilux. Supper easy and can control everything.
The number 1 reason I went with the profilux was because it is one of the only controllers that had a solution for my high AMP chiller.
but other than that. It can :
Control heating and Cooling
Lighting of course (dimable ballast T5 and MH)
Tunze pumps
Koralia Pumps
PH control for CA reactors
Dusk dawn simulation. even thunderstorms
with the PC software that come with the unit it can e-mail alerts
and 1000 more things

J

[christyf5]

Originally Posted by Jason McK

Mike Mike Mike Just go for the Best and get the Profilux. Supper easy and can control everything.
The number 1 reason I went with the profilux was because it is one of the only controllers that had a solution for my high AMP chiller.
but other than that. It can :
Control heating and Cooling
Lighting of course (dimable ballast T5 and MH)
Tunze pumps
Koralia Pumps
PH control for CA reactors
Dusk dawn simulation. even thunderstorms
with the PC software that come with the unit it can e-mail alerts
and 1000 more things

J

Ya Mike, jeez if you can drop $1200 on a skimmer at the drop of a hat I'm sure you can shell out a few hundred bucks for a controller and have some peace of mind while you're away

[hillegom]

Jason, does the profilux have an internal battery, to keep its memory in case of power failure?
Thanks

[Jason McK]

Originally Posted by hillegom

Jason, does the profilux have an internal battery, to keep its memory in case of power failure?
Thanks

no it does not, But everything it is controlling requires power so why would you need it on if the power is out?

J

[christyf5]

Originally Posted by don.ald

just wondering, if everything runs off of a single controller, what happens when the controller fails, or the power goes out etc.etc.
any experiences with this senario? to me its like having everthing plugged into one GFI outlet, and when it pops yikes!

well having a controller isn't the be-all-end-all, it just makes life easier, IMO easier than a bunch of timers from crappy tire. If the power goes out then you're screwed no matter what and you need to be spending $4k on a generator that fires up the instant the power goes out (which is probably a better investment than a controller). As for a controller failing, I have no idea as I don't think I've read anything about that (not with any catastrophic results anyways, I've heard a lot of bitching about firmware updates though )

[pterfloth]

I have 3x400w MH on my 200. I use an Aquacontroller 3 to control my lights, pumps, fans and heater. The controller turns the fans and heater on and off to maintain the target temp. In the summer, the controller turns off the MH sequentially if the temp gets too high. Saved my corals from getting cooked several times last year.

If you want to control the lights and heater only, an Aquacontroller Jr would probably be fine. I started with that and then upgraded to the AC3 because there is an iPhone app for it that let's me monitor and control the tank remotely, important for me because I travel lots.

I bought my AC3 used on RC and am very happy with it. I have 2 DC8's for a total of 16 controllable outlets. It has temp and pH probes. If you are willing to spring for it, the new Apex controller looks very nice and has excellent reviews.