|
|
|
|
|
#1
12-14-2009, 11:29 AM
|
||||
|
||||
Aquasafe
I have the same ro unit, I have a John Guest switch/tap on the intake before the ro unit and on the outflow after the unit. The flow restrictor stays off.
The only time I open it is for flushing and i just open the intake flow and leave the out flow closed for about 20 minutes. Then turn off both. To make water open the inflow and the outflow taps and bingo. Hope this helps 
|
|
#2
12-14-2009, 02:11 PM
|
|||||
|
|||||
|
Im having the same problem I have replaced the Pressure Valve and the ASO unit. With out success. I don't know what to do next
J
|
|
#3
12-14-2009, 02:46 PM
|
|||||
|
|||||
|
Pulled apart the check valve on mine and found corroded. Got a new check valve from Aqusafe (is a one-way check valve), replaced it along with a new ASOV and system is back working okay.
Is the check valve working, any chance your ASOV is installed incorrectly? From the diagram, my ASOV has the screws on the top, side labelled "OUT" is on the left. 
__________________
my tank
|
Hybrid Mode
