LF 1 1/2 id gate or ball valve Calgary

Toolman · #1 12-13-2009, 07:18 PM

I thought the hose would be 2 inch but the tape shows it under 2. is Tigerflex a strange brand for aquarium use ???

xtreme · #2 12-13-2009, 07:29 PM

What is the ID? Maybe its a 1.5" valve you are after. I think the OD of 1.5" PVC is around 1.9" Also, how many holes are drilled for your drains? If you are going to restrict the flow of one to raise the level in your overflow you should have another standpipe there as an emergency.

Toolman · #3 12-13-2009, 07:53 PM

It has an emergency pipe in overflow, I just measured it again and id is like 1 5/8 inch ond od is around 1 7\8. It is a flex pipe so it might be a little off depending where it is cut......

Toolman · #4 12-15-2009, 06:24 AM

Toolman · #5 12-16-2009, 02:59 AM

shrimpchips · #6 12-16-2009, 03:16 AM

You're looking for a 1 1/2" valve. 1.5" TigerFlex Spa PVC has an OD of 1.904" (roughly 1 7/8").

Toolman · #7 12-17-2009, 04:18 AM

still looking.........