![]() |
|
#1
|
||||
|
||||
![]() I would suggest being careful whoever you buy from. I have not personally purchased an aquarium from Bow Valley (formerly known as Inter American I believe). Before I bought my tank I did internet searches and asked around a lot and viewed various threads. I am happy that I bought an Oceanic tank (actually four Oceanic tanks).
__________________
120 gallon sps/anemones/LPS reef since 2004 Apex controller 8 x 54 watt T5 PowerModule Herbie's silent overflow system Jebao DC 12000 return pump Jecod CP-40 Cross-flow circulation device Mini Bubble King 180 Barr Aquatics calcium reactor Bucket fuge |
#2
|
||||
|
||||
![]() Anybody else have comments, suggestions, ideas, feedback?
I am looking to make my tank purchase in the early new year. thanks.
__________________
![]() |
#5
|
|||||
|
|||||
![]() I have a tank and sump I bought second hand and they were built at BV. No complaints so far although it is not fully set up and running yet. I filled it with FW did the plumbing and ran it, no leaks in the tank or sump.
Palmer |
#6
|
|||||
|
|||||
![]() BVA is good for the money you pay, super cheap and good construction. I've never heard of a single problem despite the false info people provide about recycled glass. They do use crops from various glass stores around the city to save money but it's still new glass. Sometimes the glass is etched as a result but, of course, it wouldn't be used on a viewable side, usually just the base. And the whole shower door statement is nothing but rediculous, you can't cut tempered glass, think about it.
The only issue people really have is delivery but I've heard good things lately. Just recently someone here in town got a very large tank and sump delivered within a few weeks for less than half what I would pay just for materials. All I know is don't pay up front and deal with someone other than Mitch (can't remember other guys name) |
#7
|
|||||
|
|||||
![]() Yep, dealt with them. Yes good quality and that's all I'll say in here. If anyone wants to know my honest opinion fire me a pm.
|
#8
|
|||||
|
|||||
![]() Who said its been tempered at this stage?....is it not possible that the person cutting or etching the glass made a mistake before the tempering process?...either way, most people would probably not want a tank scabbed together out of Buford's bargain glass bin
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 Last edited by fishytime; 12-16-2009 at 04:02 AM. |
#9
|
|||||
|
|||||
![]() Quote:
I've seen many tanks from BVA that cost half compared to anyone else and the quality seems fairly equal. I'll gladly make or buy a tank made from scraps/crops if it says me that kind of money. Somebody obviously never learned about the 3 Rs ![]() |
#10
|
|||||
|
|||||
![]() Even though I refuse to deal with Elite anymore, I can say he built my tank and I do agree with Lastlight. Colby and Jay know how to build.
Kevin at Red Coral also builds nice tanks and they are not overprised. Check him out. I do agree with Fishytime, you do want to buy from reputable LFS. You do get what you pay for, and do you really want to take a chance with a flood.
__________________
![]() Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk |