![]() |
|
#1
|
||||
|
||||
![]() do i need to transfer the sand to?
|
#2
|
||||
|
||||
![]() If you are saying the silicone that is sealing the tank is still sticky, take everything out of the tank and let it dry.
|
#3
|
||||
|
||||
![]() the tank itself is fine its not a custom tank only brace the plastic trim broke and i had a glass brace put in
|
#4
|
||||
|
||||
![]() Ohhhh k
Then make sure that all the old silicone for the brace is gone. and get a new brace cut, same size as the old and silicone it in again. Make sure the part where the brace is going in is dry and clean. You could put some alcohol on a cloth and wipe that area well. Then let it completly dry for a week |
#5
|
|||||
|
|||||
![]() What part of town are you in? I have a 33gallon you could borrow to get you by for the next week or two until you can get your tank fixed.
__________________
Robb |
#6
|
||||
|
||||
![]() thx but i dont need the tank now got a big plastic tupperware thing (thx anyway) so it should do. now ill just move the live rock and drop the water lvl to the sand then clean dry and resilicone the brace leave a week then ill refill. just noticed an imperfection in the tank i think and hope lol ..... theres a small 1/8 of an inch wide gap between the right bottom side of the tank and the bracing weird.
|