For those not using a dosing pump, but otherwise automated dosing thingamajig...

[kien]

Originally Posted by Tom R

Ditto

This system is the cheapest, easiest and most stable system I have used in all my years of Reef Keeping.

My Cal is steady at 420 and my Alk is steady 8.00.

I also dose Mag however it only requires a single dosing once a week to keep my tanks at 1350.

Tom R

ditto ditto.. exact same setup here. 3 pump profilux but only using 2 for alk and calc. Mag done manually once in a blue moon. I think the doser is probably one of my best tank investments I've made. Since dialing it in (Alk 8, Calc 420, Mag 1400), I have not had to touch the doser other than to refill the solution bottles. The stability comes in its ability to dose very little at a time and its precision.

[Delphinus]

I have no doubt that it's the one of the more stable and easy to use products but isn't it still .. um... several hundred dollars ?! I don't see how that qualifies as "cheapest" sorry. MY method is just as stable, maybe not as easy to use, and cost me well under $100. I'm not saying you wasted your money, I just find it hard to accept that this is the "cheapest" solution.

TeeHeeHee

[GreenSpottedPuffer]

Originally Posted by Delphinus

I have no doubt that it's the one of the more stable and easy to use products but isn't it still .. um... several hundred dollars ?! I don't see how that qualifies as "cheapest" sorry. MY method is just as stable, maybe not as easy to use, and cost me well under $100. I'm not saying you wasted your money, I just find it hard to accept that this is the "cheapest" solution.

I just picked up a few aqualifters the other day to do something similar to what your doing. I had planned on using a few 1/4" john guest valves to control the drip rate but maybe I will look into the needle valve. Do you think its much different?

So far its cost a fraction of what I paid for a dosing pump earlier this year...which I sold before ever using.

[Jason McK]

I not sure if Tom meant the Profilux was the cheapest. But the dosing method is the cheapest in comparison to the equipment required when using a CA reactor

J

[GreenSpottedPuffer]

Originally Posted by Jason McK

I not sure if Tom meant the Profilux was the cheapest. But the dosing method is the cheapest in comparison to the equipment required when using a CA reactor

J

Yes he said it was the cheapest HE has used.

[Delphinus]

Ohhh. Ok, that makes sense then. Yes, far less investment heavy than a calcium reactor. And a calcium reactor is a whole new definition of fussy (at least when first dialing in and making steady-state).

PS. When I reread my post now it comes across a bit harsh .. wasn't meant to be and if anyone else feels it's harsh besides me then please accept my apologies. Posted in haste without adequate smileys to convey the appropriate silliness in my voice that would have been there had I been speaking the words not typing them.

[muck]

Its ok Tony. I edited your post to make it sound not so harsh.

[Delphinus]

Thanks buddy. Er, I mean, giggle giggle thanks!

[banditpowdercoat]

So, If I were to get a couple Aqualifters, what do I do with them?? LOL Kalc? or? So far Ive just used ChemMaster's crystals for my CA/Mg