Wide 90 Gallon build!

purelife · #2 11-12-2009, 12:54 AM

Attachment 5191

So i have this overflow box its 3 sided i need to cut one of the sides with the teeth off so i can place this in the corner of my tank i did the measurements and it should be more then fine..
each side is 6" each so the 2 sides will be 12 inches of area..

robert · #3 11-12-2009, 01:59 AM

You gonna love your PS3 pump. It's not just small, but super, super quite. I don't see many people using poseidon pumps thou, I wonder why.

Good luck with your build and keep the updates coming.

Kevotron · #4 11-12-2009, 02:02 AM

What did u use for ur overflow box and what did u use to cut out the slits ??

leducreef · #5 11-12-2009, 02:28 AM

i got my PS3 pump used
it the best pump i have ever hade other than it rases your water temp a lil
lots of power for its size

purelife · #6 11-13-2009, 06:38 PM

I need some help with what height to mount my overflow box..
Its 2 sided 6" inch each side its going to be mounted in the corner of the tank.
The box is 6" high the teeth cut are 1" and a bit deep ...

At what height do i mount it right to the top rim of the glass or a little lower ?

purelife · #7 11-20-2009, 06:16 PM

Quick update before the weekend! Everything i need is in stock and ready to go it can't be at a better time either i am off work till December 4th so i have plenty of time to setup and tinker with the new build.

First picture painted my wall that is behind the tank a dark blue the tank looks nice when its in front of it.

Next is my Sump was finished this week and was able to pick it up on Thursday looks great and should be nice the dimensions are 36 long x 18 wide x 16 high. 3 chambers return section with a skimmer section and a fuge section.

Next I've had for awhile its just been tucked away is my lighting 6 bulb 54w ATI Sunpower
can't wait to have this mounted.

And last bits is plumbing i picked up from JJ Downs the other day turns out they are 8 mins drive from my work so i ran out during lunch and gave them a list they hooked me up with what i need.

So far couldn't be happier with how things are going, i am in the process of thinking up a new skimmer looking at the Vertex Cone 170 or the Super reef xp2000 also i am looking at putting a controller into the system but that's a little more further down the road.

But come Monday afternoon build starts dry fit all the plumbing, mount the lights, level the stand and so on.