|
|
|
|
|
#3
11-01-2009, 02:43 PM
|
|||||
|
|||||
Quote:
Quote:
Quote:
I ran into a bit of a snag....I came home from the shop yesterday to a bunch of water on the floor  .....It seems as though the top plastic trim on the tank leaks. Not much mind you but enough to slowly trickle down one corner of the tank.....I temporarily fixed it by lifting the tank and shimming it out of level *makes flexing type motions with his arms* (even surprised myself, that I could lift the tank(amazing what you can do when your ****ed off))....I didnt have the loc-line installed yet as I forgot to pick up a "Y" for it....Im hoping with the LL installed that I can direct the flow so it doesnt shoot straight out and up against the glass causing it to roll up and hit the trim....I could also throttle the return back a bit if I have to, but will do that as a last resort.....Well not really the last resort.....If I have to I will shut the return off for a day or two and re-silicone the top trim.I added some acan frags to the tank.....yay a place where I can do acans without my regal tang eating them  ....I will snap a couple pics when they adjust a little....
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 
|
Hybrid Mode
