![]() |
|
#1
|
|||||
|
|||||
![]() Is that not the 5mm glass cube if it is for sure it is tempered.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#2
|
|||||
|
|||||
![]() Never mind I thought it was something else. Not sure about that one good chance it is though.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#3
|
||||
|
||||
![]() Yes you can i bought a JBJ 12 gallon DX.
And have it pumbed into my main tank. Its a 3/4 inch hole right through the back of the tank near the bottom and have a durso plumbed in. I plan on putting one for the return line but havent gotten around to it. For now i just have a hose dropped inside the lid nice and secure like. see the pics to see that you can do a 12gallon JBJ, I should state that yes i may of had the only one in the world that can be drilled but it was a breeze. I have also drilled a fluval edge and can say it is not tempered on the back either. ![]() ![]() |
#4
|
|||||
|
|||||
![]() I asked the same question a while back.... http://www.canreef.com/vbulletin/showthread.php?t=52958
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |