|
|
|
|
|
#1
10-20-2009, 02:40 PM
|
|||||
|
|||||
 ok befor you get carried away, you have to do a control first.. what you do is measure your Sg, ad a knowen amount of salt desolved in water then measure Sg to see how much it went up. what I recomend is to warm up some RO water.. add some salt and mix well (I would need to know the size of your tank and water volume to recomend a starting amount of salt) measure the Sg add the mixture in a high flow area wait 1 hour and measure Sg again. (this is based on a salt mix requiring 1/2 cup per gal) if you look at it another way 50 cups of salt will raise 100 gal .026, so 5 cups of salt will raise 100 gal of water aprox 0.0026, so 1 cup will raise 100 gal aprox 0.00052 10 gal aprox 0.0052 so if you have a 40 gal that is at 1.024 and you want to raise it to 1.026 you need to add about 16 cups of salt (double check my math befor following, its early and I am getting kids ready at the same time )Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive. 
|
|
#2
10-20-2009, 02:50 PM
|
||||
|
||||
|
Step 1
Take your hydrometer to one of 2 places. 1) LFS that has a refractometer and test its accuracy 2) Garbage can and buy a refractometer Make sure before you start making too many changes you get an accurate salinity measurement. Kevin
|
|
#3
10-20-2009, 02:56 PM
|
||||
|
||||
|
Another option would be to add a little salt to your makeup water everyday. That way the salinity will slowly rise.
__________________
75 Gal. display with 40 Gal sump - Dual 1.5" drains, Aragonite sugar sand substrate, SWC Extreme 250 Cone Protein Skimmer, 1800L return pump, 4 AI SOL LED Lights, 250 ml pellets in a recirculating bio-pellet reactor, BRS Doser pumps for Calc & Alk, Tunze Osmolator Auto Topoff system connected Vertex Puratek RO/DI.
|
|
#4
10-20-2009, 11:54 PM
|
||||
|
||||
|
thanks for all the help and i have a 50g tank with a 20g sump and i just want to get my tank back to were it was with out hurting anything and am geting rid of the hydrometer and geting a Refractometer does anyone no what one i should get what are some good ones thanks
|
|
#5
10-21-2009, 01:06 AM
|
||||
|
||||
|
JL Aquatics has a good temperature compensated vertex model for $49.95.
|
Hybrid Mode
