|
|
|
|
|
#1
10-18-2009, 03:00 PM
|
|||||
|
|||||
Chances are your ATS wont work if you decide to start running Zeo...The zeo system will remove all phosphates and nutrients from the water column, likely rendering your ATS useless. I personally would ditch the UV sterilizer....They kill both bad and good stuff.....You said you added the acro 4 months ago?....how old is the tank?
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 
|
|
#3
10-18-2009, 03:22 PM
|
|||||
|
|||||
|
I wouldn't bother with the complete Zeovit line (which starts with the start kit) unless you're planning a SPS dominant tank where an ultra low nutrient system will lead to ultimate coloration.
 You don't need the reactor and the zeolites, and the whole shebang. If I were you I would post on Zeovit forums and ask them how to bring down your nitrate without using the whole system. They are very welcoming there, and find no offense in those who just want to use a few additives. However, I warn you that once you get into it and notice the dramatic results it is difficult to not buy the product line!!  I am a HUUUUUUUGE skeptic, and it took me a few years to try it, but I started using a few products about a year ago, and I haven't looked back since.You will have to take the UV sterilizer off line though, as it will kill the bacteria you are dosing into the water column.  You can always get it back online if you have an Ich outbreak.
|
Hybrid Mode
